Hello all. I have a few AnyConnect VPN clients that are complaining about slow performance in certain apps. I'm pretty sure the issue is cause by the user's ISP service latency (70 ms) to my FTD, combined with some older, noisy apps (Lotus Notes). Ho...
Forum Posts
Hello,I have pair of ASAs in Active/Standby HA mode. ASAs have VPN tunnel going out to the data center where ISE (TACACS) servers are. I can use TACACS for the Active unit, but it seems like Standby unit can't get to ISE at all, it just times out. Si...
I need help with this error. I am unable to reinstall due to admin rights.Cisco Anyconnect The program cant start because vpnapi.dll is missing from your computer. Try reinstalling the program to fix this proble,
Hi everybody, I installed the anyconnect on my mac (catalina). I chose to install every option; however, I realized i only need to download the vpn and the "posture." So, I deleted all the anyconnect files, thinking that i can restart the whole proce...
Dear experts, I must admit that I'm facing strange issue with my Cisco AnyConnect. When I try to connect VPN through Cisco AnyConnect via my home WiFi or LAN cable, my success rate is only 1 out of 30 times or lower (what I want to highlight is the...
Hello all,we currently use RSA SecurID tokens & client certificates for authentication in the vpn connection. Is there a possibility to use an additional authentication methods in an additional connection profile? Background of the question is that t...
Resolved! ASA A/S Site to Site VPN
HiCan someone clarify for this for me please?I plan on placing a pair of ASAv's in an environment to bring up an IPSEC VPN.* Do I need a tunnel for each ASA, and an external IP address for each as well? If not, will the tunnel just fail from one ASA ...
I have a number of IKEv2 Site-to-Site tunnels on my ASA. Some of them are only brought up when we want them to be and we have a script that deletes a route and clears the IPSEC SA when they are not in use.The problem I have is that when we do this, t...
How to choose a transform set used by a device during the security associations process? On what parameter, a device chooses a transform set from a list of transform sets??
Up until a couple weeks ago we had no issues connecting Apple devices (iPhones and iPads) to our VPN using Cisco AnyConnect. It seems now we cannot connect unless we are on a PC or Android device (tablet or smartphone). So all VPN connections are wor...
Good morning I have a router cisco C1111-4P (1RU) with active security license securityk9. I need to configure a easy vpn client in this router but I found that the CLI commands are different from router Cisco 891F. Someone can help me to teach h...
Hello,I have an old ASA 5505 and I have configured a remote access VPN to work with Cisco anyconnect.It was working fine until I wanted to use our VOIP line through the VPN.My softphone is not connecting and I went to check the firewall logs to find ...
Hello I have a VPN connection with Site B and C, I have ping between my local Subnet to Local Subnet of Both sites B and C my question is how to allow local subnet of B to reach C? is this possible by just allowing in Access Policy Rule? I have attac...
Hi All, I am looking to implement Pre-logon (Start Before Login) as well Always-On. And, certificate authentication for SBL and MFA (PingID based) for Always-On subsequently. And, I got to kown that SBL can be implemented with Always-On. So I am look...
I configured FMC with FTD I created a site2sit vpn, but before deploying it,I deleted it, now I can not deploy anything,it asks for deployment, but when I press deploy .the deployment row will appear again,as shown below. regards
