VPN

Site1 want to access an XCOM server in Site2 from their XCOM server on port 8044The destination address they use is 172.23.192.222 which goes to the PIX and is translated to 10.0.0.49 – The XCOM serverThe VPN comes up fine, phases 1 and 2. The thing ...

Hi,I have an acl and nat entry allowing port object ftp to FTP server in a sec zone 90...the acl specifies two source networks coming from sec zone 70 to the ftp server...the FTp works fine from one source,but from other source net whenever a client ...

I am trying to use PPTP with MSCHAP v2. Using a PIX 515 and a Microsoft windows 2000 VPN client. Does not work so far. MSCHAP v1 works fine. Is this not supported? I am using IOS 6.3 on the PIX. Please help. Thanks

We would like to set up some users to use the Cisco VPN Client. Many of these users already have other VPN Clients on their desktop's. I have read that the Cisco VPN Client uses UDP port 500 which causes a conflict with the other VPN Clients. Can t...

I am trying to install VPN client 4.x on my machine. It comes up saying that I need to uninstall VPN 5000 client before you install a new client. I cannot find any file on registry or anywhere else regarding VPN client 5000 installation. Need help......

I have a dynamic tunnel between a 831 and a Pix 515e. What ports do I need to open on the 831 to allow the tunnel to stay up, but close un-needed ports to the outside?

should we or should we not allow ICMP echo requests to hit our corporate VPN concentrators and why?

Router A and Router B are IPSEC tunnel peers, using the Internet as the connectivity transport. Routers A & B perform NAT pooling with overload for Internet bound traffic - traffic destined for the remote side of the VPN tunnel is exempted from the ...

I have a PIX 515 and I am supporting many users with the VPN Client v4.0.2. I have many different vpngroups configured for various reasons. I would like to utilize AAA for some of the groups but not others. Is this possible?

Is anyone out there using the SSL feature on the VPN 3000's to use Citrix? If so...what are your thoughts? Did you experience any issues?

Folks, Does anyone the difference between ACS appliance and windows based ACS server. I have worked with both, just curious. I have to get an ACS server for LEAP authentication for my wireless access points, not sure which one to go for. I fin...

Currently we have a remote 501 pix that connect via a site to site vpn to a central 515E. The central site can see the single private subnet at the remote location just fine. The remote location can see 3 private subnets on the inside interface just ...

Are there any patches available to allow the current VPN client for linux to compile against a 64-bit compiled (Athlon 64) kernel? I've noticed that there are warnings for it - any progress or estimate when it will become available? Thanks.