VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

I wonder why theres VPN client v3, Ciscosecure VPN cleint v1.1 and VPN 3000 client, not to mention PPTP for Microsoft. When will I use these clients and why did Cisco created so many clients instead of making just one. anybody wants to share his insi...

ajarina by Level 1
  • 313 Views
  • 1 replies
  • 0 Helpful votes

The wireless card is a DWL-650 and the wireless gateway is a DI-713P. Once the client is installed and reboot,you lose all network connectivity. I noticed that if I disable WEP and MAC address control that I gain connectivity again but my D-Link conn...

tmartin25 by Level 1
  • 406 Views
  • 1 replies
  • 0 Helpful votes

Hi, I have a Cisco 1720 router that has the only public IP on the network. I have just put a PIX 506 firewall behind it on a private IP. The Cisco 1720 is performing NAT on all packets. The PIX is not doing NAT. Because I cant address my pix on a pub...

dave.cook by Level 1
  • 370 Views
  • 2 replies
  • 0 Helpful votes

I have Cisco Pix firewall 5.15 with 6.x ios. I have established a site to site vpn with a customer who is having a different firewall. I have also configured site to clinet vpn connectivity. Both were working fine. But now suddenly the site to site ...

I have several 3.5.x clients that are being disconnected from my PIX 515 with the same log entries. I am trying to understand the issue so I can understand the solution, but neither is apparent to me. Below is the end of the lof file for one particul...

I am trying to find a basic TACACS+ freeware in the cisco site and saw in some document that it can be found at:FTP: ftp://anonymous@ftp-eng.cisco.com/pub/tacacs/ But actually when I try to access the link, it seems to be not available. Does anyone k...

I currently have in place a 1721 as a head end for VPN. I am looking to connect to it with both an 806 broadband router and the Cisco VPN software client. Does anyone know of THE resource that would help me out with this. I have searched the forum...

mfracher by Level 1
  • 286 Views
  • 1 replies
  • 0 Helpful votes

I have a PIX with three lan cards: inside, dmz and Outside. The vpn client connect and work fine with my services in the inside lan, but i can't connect with my web servers in DMZ. Only connect to this server if disconnect the VPN.i test many options...

atortora by Level 1
  • 369 Views
  • 3 replies
  • 0 Helpful votes

I've run in to a problem since upgrading to SP 1 for WinXP. I use EAP-TLS to authenticate to an IAS radius server when using the Aironet 350 card. I am NOT using the Aironet utility, using the native XP utility. After installing SP1 anytime that I...

ffiordaj by Level 1
  • 392 Views
  • 4 replies
  • 0 Helpful votes

On a Cisco Concentrator is is possible to install a certificate that expires in 2048. This is not possible in the client. If you try to install such a certificate you will get an error. I seems that around +2 years i max.Is this expected behaviour

umadsen by Level 1
  • 294 Views
  • 1 replies
  • 0 Helpful votes

Someone know where can I find a Presentation with a VPN Porfolio.Thanks !!!

fergon by Level 1
  • 407 Views
  • 2 replies
  • 0 Helpful votes