VPN

We have a Windows NT 4 / SP6 workstation that only sees ~150kbps into our network. The connection is DSL, 768kbps-capable each direction. The PC is a PIII 667 w/ 128MB RAM. She VPN's into a 5000 concentrator.The connection speed as-is is unusable ...

Our ISP is going to be giving us a new IP address for serial interface on HO router, which is also the VPN endpoint peer for our remote sites. Remote sites use 1720 routers with IPSEC/FW feature pack. I want to be able to add the new ip address to th...

Looking for information to setup the following...3640 VPN setup for Remote Client Access1. Enable Cisco Catalyst 3640 VPN IPsecrunning IOS 12.14 Fast Ethernet Ports with 100TX backbone connection to the Internet2. allowing at home workers with DSL St...

I have a VPN concentrator 3030 at one of my sites,and VPN concentrator 3015 at my other sites.I was using 2.5.2(F) on the concentrators and i had VPN clients with ver 2.5 connecting to my concentrators.It worked perfectly fine.Then i decided to upgra...

Hi,does anyone know how to configure a cisco router to enable a VPN session(IPSEC?) from a Sonicwall Client VPN from Internet to pass through. I'm using a Cisco 2500 series leased-line router with IOS 11.3 with IOS firewall. What must I include in th...

I have downloaded the Cisco VPN Client 1.1, but I cannot locate the manual/docs to support this client version. Other Cisco docs are recommended PM 6.x users should run at least v3.x of the VPN Client, but I cannot find a 56-bit Crypotographic versi...

I was wondering if anyone has had any issues creating a pix to pix vpn with the remote site using dsl. I have run into back to back issues where the remote site has dsl and I cannot get a tunnel up. Is this just a coincident or is there more to thi...

I have a VPN over internet with two Cisco 1710 routers, with NAT. It works fine. But I want to limit traffic over VPN with:interface Ethernet0rate-limit inpur access-group 103 8000 8000 8000 conform-action transmit exceed-action dropaccess-list 103 p...

My client has an existing PIX-PIX IPsec VPN between their offices thoughout the world. They wish to start using a video conferencing application that multicast the video streams to interested parties. I read somewhere that a PIX will not pass multica...

How can I telnet to PIX inside interface from the VPN (I.E. from 10.128.128.0 telnet 172.16.3.252).I have tried using telnet command:"telnet 10.128.128.0 255.255.224.0 inside" but still no working.Can you help me? DanteFollow: I've included the confs...

We have a remote office that is connected to the ISP provider with a single Pulic IP address. How would you set up the pix to use the single IP address for the VPN Tunnel/(internet connection for local users). I have heard mention of problems with t...

Hi,Is SA life time same as Key life time?? Is there any default value for this??when a key/SA expires and new SA becomes live ..does it affect the data traffic..does packets gets dropped at the timeof change over?? or does the TCP sessions breaks??IF...

Has anyone had any luck in getting a gateway-to-gateway VPN up between a PIX 515 6.0.1 and a Symantec VPN Appliance 100 (Nexland OEM)?We've tried IKE pre-shared DES ESP MD5 with no luck.

I have a user running Windows Me and the 3.5 Cisco client. She connects fine to the VPN system. When she goes to run any resources like e-mail, telnet session to our mainframe, etc, that application totally locks up. We just converted from a Norte...

As a resolution to a printing problem, we had concluded to rebuild the IP stack, which did solve our problem. This, in turn, has caused my Cisco 3.1 client not to ork. I have tried reinstalling 3.1 and even the 3.5 client to no avail. I also compl...