Wireless

Hi Guys,    I am having a vWLC deployment with around 200 APs, vWLC is running version 8.0.152.0.    I have a mesh implementation using AIR-CAP1532E-E-K9, I have total of 17 MESH APs, 4 of them are RAP and the rest are MAP, but i am having very slow ...

Hello All I currently have an 2802i running ME 8.5.140.0 at home for testing. It working mostly fine, but has one very weird issue.  Attached are around 19 clients in the 2.4 and 5 GHz bands. There is 1 SSID. The AP is attached to an unmanaged switch...

Hi, I have a vWLC deployment with OS version 8.3, i am having an issue about the client IP address.   I have created 2 SSID, the first one (SSID1) is assign to the management interface with subnet (for example) 1.1.1.0/24 Second (SSID2) is assign to ...

Hello, I have Cisco WLC 5508 and i have Cisco AIR-CAP1552EU-A-K9 Outdoor Wireless Mesh Access Point, Can i use this access point as normal access point for mobiles and laptops ?

I have casio xj-f20xn network projector.When i try to connect cisco wifi,projector connect easily with SSID,got ip but the authentication code generated by projector is not working.In other AP like netis,TpLink,projector is working fine.Currently i h...

Is there a way to avoid using the setup wizard on Mobility Express?  I can SSH into the controller and make configuration changes.  However, nothing will work until I the WLAN Express Setup flag is set to True.  

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255) *Nov 21 17:00:38.999: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.10.77.95:5246*Nov 21 17:00:38.999: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11...

Hi,We are looking to at a Cisco Wireless solution for our office. Looking to start with 4 APs and a controller.  For the controller we are gonna use a L-AIR-CTVM-5-K9, however not quite sure what APs are compatible with the controller. Do we want APs...

Hi   I have new CIsco WLC 5520 with 1 hard drive. If i buy another a second hard drive does it support RAID?

Hi, is it not possible to configure SNMPv3 traps from a Cisco WLC?   Why can I configure only SNMPv2 traps (with community)?

Hi,   My Customer want to upgrade their existing Prime Infrastructure v2.2. They already convert the existing license (with cisco TAC) to smart licensing from v2.2 to v3.x using smart licensing and they already install the new PI software v3.4 to new...

Hello,Would you guys know how I could get/enable a controller to generate a log when the buffer is full and overwrites older logs?

Hi All,We have installed 60 cisco access points in a site. all are working fine, except 10 access points. all the user are connecting  to 2.4 Ghz radio and no users are connecting with 5.0 Ghz in those 10 access points only. Same users are able to co...