Hey Community! I'm excited to share something we've been working on that I think will really resonate with many of you managing wireless networks today. We just released the Cisco State of Wireless Report 2026, based on insights from over 6,000 wirel...
Forum Posts
I'm trying to set up an ethernet bridge using two 1572's, like this: WLC --- switch1 --- RAP - - - MAP --- switch2 The AP's are running in Flex+Bridge, the port on switch1 is trunked and all VLAN's are allowed. The WLC is running 8.2.100.0. I can con...
Resolved! AIR-CAP 3602I-R-K9 web interface
Hello. I did update of the access-point AIR-CAP 3602I-R-K9 with ap3g2-k9w8-tar.153-3.JF8.tar After what AP was blinking with green and no any wireless network is available. Tried to go into CLI but seems like it is totally reseted. I did capwap ap co...
Resolved! Cisco WLC's and BlueCat DHCP Leases
Morning All. Any guidance would be most appreciative. 2 Cisco 5508 WLC's with about 20 different VLAN /22's shared between them. We have a Blucat/Adonis DHCP server. Problem is a user gets a DHCP address in one AP group/VLAN, then get's another one f...
Team, I will be setting up a cisco wlan for guests and visitors on a cisco 2504 controller and my intention is to use port 3 or 4. currently the wlc is configured to use ports 1 and 2( no LAG) for the current wlans and will be setting a new int...
Hi Experts, I could not access the APs even SSh/telent and web. The APs are managed by WLC. I can ping all of the APs but could not access all APs GUI mode also. Please suggest me.
Need help to move LAP from one 5508 controller to other 5508 controller. What steps should we follow. P.S both controller not in HA.
I am sending the radius accounting information from our Cisco 5508 WLC to our Fortigate firewall and the class attribute is not correct The following is the log file from the Fortigate showing the radius accounting information. 61,07:45:16,"10.80.0...
Hi all Since upgrading my WLC to 8.5.131.0 I get a lot of IDS 'Deauth flood' Signature attack messages (and a few other IDS ones) from my Prime Infrastructure. The attacker's mac is varies, sometimes it's a normal client, sometimes even an AP interfa...
Hi, we can check the current regulaotry domain of any cisco WAP at this URL. https://www.cisco.com/c/dam/assets/prod/wireless/wireless-compliance-tool/index.html Is there a way of history on regulatory domain on a pertcular WAP? example 3702 WAP ...
Hi, Wireless client are not getting valid ip address. AP is setup as controller(5520) based. Some clients are able to get ip address but some others clinets are getting invalid with fe80::d182:c571:a184:ed6b IP address or it show 0.0.0.0. Getting t...
Hi all, as I think I explained in a previous post, our network engineer left and I am completely new to a lot of this, including the Cisco controller. Anyway, we have 3 SSID's, one of which is turned off, we are switching it back on and switching the...
I have 2 SSID to connect to my Wlan and I want to change the password for each SSID to a different password. I did not setup the site, so my question is when I go into Wireless/ Global Configuration and under the username and password change function...
Have a few ideas to buy IP Cameras. Most of which are Ethernet Connected and none use WPA2 Enterprise. Whixh isnt any big deal. I have several old stock 1142N Access Points which I have Autonomous firmware on them which I would be mounting nearby f...
Dear All, We have Cisco WLC 2500 series and have configured LDAP authentication 802.1x using Windows Server 2016 Active Directory. We have followed the link given below as guide. But after that configuration, windows user can not connect with the WLC...
Hello experts, Need your advice here. We noticed multiple users in different areas of the building observing random disconnects from the network. We reached out to Cisco TAC and they suggested the following. 1>Disable optimized roaming 2>Disa...
