hello, I am having a trouble with my Meraki MR44.there has been no issue till yesterday.but our one client marchine can not access to MR44 from today.error code is as below.Feb 17 16:04:30 802.11 disassociation802.11_reason_code = undefinedFeb 17 16:...
Forum Posts
HiI am testing the conversion of a standard WLC deployment with the usual method of tunnelling the SSIDs back to the WLC and changing this to a fabric WLC with some SSIDs then changed to fabric mode.I do the initial learn device config process and al...
I recall last year there was some issue with client balancing on the AP and recommendation was to disable it.I am aware the latest firmware has this resolved, has anyone enabled client balancing and what is the experience like.
Hello,i had a ssid with PSK (WPA3-SAE)Google Auth Sign in Methodwith no VLAN tagand configure my domains in the spalsh pageI get the google Auth email Adresse window but then i click ongoing nothing happens and i get a error 400 Had anyone an idea ?t...
We want to join 1800 APs to the 9800 controller.However, APs repeat connection and disconnection.I think this is a licensing issue with the 9800.When I type the show license command, "No licenses in use"can someone help me?? WLC#show inventoryNAME:...
The following two official documents have been referenced to determine the criteria for selecting a Master AP for Cisco Mobility Express.Cisco Mobility Express Deployment Guide Release 8.8https://www.cisco.com/c/en/us/td/docs/wireless/controller/tech...
Dears GreetingsI have 8510 wireless LAN controller how do I restrict clients using corporate SSIDs to share it via mobile hotspot
I tried a lot to switch to flexconnect mode, but the join with WLC failed the poe and ap connection ports as access ports and access vlan, it becomes a join with wlc regardless of the ap mode However, if you switch to trunk and specify native vlan, i...
Has anyone else had any reports from their users where APs are the connected devices are running at very slow speeds then we reboot the AP and everything is resolved.Three examples in the last week speeds 13mbps down and 0.49 mbps up on a 1GB circuit...
Hi, I have sent this to TAC and the response was unable to pin point the issue and difficult to analyze it and asked me to run iPerf which I think it has nothing to do with this issue. I have given them the whole details though!So I post it here and ...
Dears, I am Configuring a wireless LAN network using a Wireless LAN Contoller in Cisco Packet Tracer softwar. I was able to configure the Wireless LAN controller by setting up an admin account and established three private WLAN network. But after est...
Hi everyone, I’m facing an issue with the EWC. My company is migrating from a Cisco 3504 controller to a Cisco EWC (9115) for managing APs. In our existing setup, the controller has a built-in DHCP server that assigns IP addresses only to wireless cl...
i am looking for the wireless access point which is convenience for below circumstances.・temperature ：above 40°C・install 8 meter high ceilinghas there any product device?currently ,i am using (C9115AX、C9120AX、C9130AX) in each branches.
I want to add performance licese on my controller (both primary and secondary controller).But, I am not sure how long network downtime will it take.Has there any effect on users ?If yes, how long will it take?
I am having issue in my Voice WLAN while calling and I want to disable SIP ALG on the WLC. Can someone please help me how to do it.
