Hello, I understand the WSSI module is not supported when using the 5760 WLC, however, is wIPS supported when using the APs in Monitor Mode with the 5760 and MSE and PI?ThanksRays
Hello, I understand the WSSI module is not supported when using the 5760 WLC, however, is wIPS supported when using the APs in Monitor Mode with the 5760 and MSE and PI?ThanksRays
hiI have a problem relating to the authentication and authorization of wireless users (WPA Personal + Web Authentication) using captive portal, the problem is because users belong to more than one group of the active directory is the repository for p...
Hi would anyone know if cross-stack port-channels can be configured on a stack of 5760 WLC's?I need to aggregate x4 20Gb port-channels comprised of x8 10Gb 10G-LR SFP'sThanks
Hi All, When we tried connecting ap, its registering to the WLC 5508 with version 7.6.120.0. But it shows operational status as DOWN in WLC and blinking in red,green continuously. If i admin disable it, then it is coming UP and instantly goes DOWN. A...
I need to help with problem.The customer need to turn off LED status. because it installed in room of hotel.The blink LED interference them eye to sleep.I need to know command line for turn off LED of AP standalone mode in firmware version. 15.x.xIt'...
HI can someone help me please? I'm trying to have AP grouping on my network under the same SSID. the problem I'm having is the client are fine if they boot up initially on their location. they are fine if they roam around and maintain the connectivit...
Hi Experts, Awhile ago, I upgraded the standby 4404 WLC from 5.1.151.0 to 5.2.193.0 to 7.0.240.0 and the upgrade was successful. Before upgrading the active WLC, I tested a couple of APs to join the standby WLC (enabled master controller) and the A...
Hello , kindly as far as i understand that option 82 is to add identifier like AP-MAC into DHCP requests , however , if you have a large scale deployment for thousands of access point , so is it practically to configure in the DHCP server a list...
Hi I am using Cisco secure ACS version 5.5.4 , I have done required configuration to implement tacacs+ for router and switches Now I am able to login on router and switches and i have synchronized my authentication with AD Issue is that when i used t...
I have a Cisco Aironet access point AIR-CAP3602I-A-K9. I connected it to my laptop (running Windows 8.1 Pro 64 bit) with a USB-to-DB9 and DB9-to-RJ45 console cable. I could not open CLI via Putty or SecureCRT. After waiting several minutes, I only go...
I have a Cisco Aironet access point AIR-CAP3602I-A-K9. I connected it to my laptop (running Windows 8.1 Pro 64 bit) with a USB-to-DB9 and DB9-to-RJ45 console cable. I could not open CLI via Putty or SecureCRT. After waiting several minutes, I only go...
I have a WLAN SSID that currently does not have flexconnect enabled. I am preparing to deploy some APs at a remote site and will use local switching there to save WAN bandwidth. If I enable flexconnect on the WLAN and not the APs, will clients curr...
HiI have a WLC 5508 and 4408 servicing 100 APs. the problem is client wont connect to the closest AP! this problem leads to creating over association situation for one AP. I have tried disabling the slow data rate. I tried the Client Load Balancing ...
Hi,We are starting to see requirements for the new 802.11ac AP's to be deployed for Voice/Video applications (Lync, Jabber) and I want to know the "rule of thumb" for calculating the number of devices per AP (2700/3700 models).In the past 802.11b/g/n...
Hi, I have two WLC 8500 working in SSO and with nat enable feature configure in management interface. SSO is working, but i have to configure NAT before SSO becasuse when SSO is up, ip address and nat are greyed out in managemente interface. Some AP'...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 11-12-2026 01:01 AM | ||
| 10-15-2026 05:58 PM | ||
| 10-12-2026 06:46 PM | ||
| 09-30-2026 07:34 AM | ||
| 08-10-2026 11:32 AM |
| User | Count |
|---|---|
| 5 | |
| 2 | |
| 2 | |
| 1 | |
| 1 |