Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
Hello,I have a Cisco 5508 WLC with AIR-CAP3502E-E-K9 APs. I want to enable 802.11r (Fast Transition) and understand that some legacy clients may not support 802.11r and therefore if you select, for example, FT 802.1X as an authentication key manageme...
Resolved! CAP2602i and 4400 series controller
Can someone tell me if the 2600 series access points are compatible with a 4404 controller running 7.0.235.3 code? I was looking for a compatibilty matrix for the AP to controller to code comparison but couldn't find one.
Hi All,I´m working in a deployment of a wireless network where I have a main office with one WLC controlling the APs and here I have one wireless VLAN which is working fine for main office.My problems is I have about 3 branch offices and each one of ...
Hi.I am working on setting up a new WLAN infrastructure. I have set up different SSIDs connected to different VLANs, in the AP.I also want to use Windows NPS for authenticating users on the different SSIDs, with different authentication methods based...
Hi AllI recently upgraded our PI 1.2.1 to 1.3. It all worked fine but I had no more TFTP working. It didn't really work in the previous version, but now it didn't work at all. I could neither put nor get a file.So today I checked out some system sett...
Hi ,I want to use 802.1x machine authentication .Please suggest with below scenarios1.how we are achieving machine level auth?2.Whether ISE will support machine level auth?3.How to configure iphone or andriod to support machine level auth?
Resolved! Wism2 and Wism1 in the same Chassis
Hi,I w'll install one Wism2 into existing Catalyst 6509 running 12.2(17)SXF IOS version, and has Two other Wism modules (old generation)Could advise witch IOS can support these three mixt Wism?And can you tell me if I’ll configure the ports channel f...
Hi,I have a WLC 2500 which I would like to configure with guest access. I want to set up a web passthrough with email input. Is it possible to collect the email address information? Is it stored somewhere in the controller or do I need some extern...
HelloI have a Controller 5508, CAP 3501EI have a problem, all client who connect in 802.11n connect only in Bn and not in Gn.When I diseable the n, the same client connect in 802.11g.Could you help me that the client can connect in GnThank youchristo...
Good afternoon!I'm having issues with AIR-LAP-521G-K9 access pont. I was unable to find any documentation guide for this AP. The issue is that CLI doesn't work and I'm assuming it's not supported so it should be configured using CNA or something sim...
How would you implement Intra-BSS Security, so that users utilizing the same AP could not speak to each other? For example, user A could not ping user B.Could you do the same as above, even if the users were on the same subnet?It is my understanding...
Resolved! Cisco 5508 series WLC alerts
Hi Team,We have a 8 Access points connected to a WLC. We are constantly getting the below alerts on one of the access point. I am not able to find out exactly what that error means.Any help much appreciated.Message: Air Quality Index on Channel '11' ...
Anyone have a link that explains how to convert a 1602i AP from lightweight mode to autonomous? thanks!Joe
Strange question but do the Cisco omnidirectional external antenna come in different colors? I don't think they do.If not, could I paint it (non lead based paint)? It's a question that's been asked by our building contractor/architect.
Hi all I´m a bit newbie on cisco wireless world and I would like some assistance on that if possible I´m using a Cisco Wireless Lan Controller SM-SRE-700-K9 nd I had installed for 2x 25 units license pack on this, what gives me 50 APs capacity.Strang...
