Wireless

Hi,I want to connect a VDSL Modem with the WAN Outside Interface Fa0/0 of my ASA5510.The ISP use for VDSL a Vlan 7 tagged.What is neccessary to configure in the ASA to establish a Internet Connection over VDSL?ThanksSent from Cisco Technical Support ...

Hello, I need to reactivate my DHCP Proxy but I cant.I'v get this message : Failed to update dhcp proxy.In Cli mod : Message Log Severity Level ...................... ERRORcan you help ?

Hello EveyoneI have write one external web page but i dont know why not auth pass?my web page can pass or fail to auth my radius and display to screenbutcontroller how know client use auth is pass or fail ??ths!

Hello,Presently I managed some AP1242AG in ofiice areaI need implement WPA and MAC filtering.I found what :In IOS 12.2(13)JA branch IOS and before, MAC authentication was supportedin conjunction with WPA.In 12.2(15)JA and above, configuring MAC authe...

Hi Expertsany AS Image on CCO for the Cisco AP 1260,if so how to download it to the flash of the ap then boot properly the new code for standalone? thing is that have one with lwap enable so that i cant do any thing ,upon booting it looks for control...

Is there a command that when entered into a Dell switch which will list all MAC's and corresponding ports which they are plugged into? I only know of typing 'show bridge address-table ethernet e*.' which requires you to go to every port in the switch...

HiI have 5508 WLC (Running 7.2) in seperate buildings. I have created ACL's on both Controllers and the only thing that is failing is the Mobility Control Function. The ACL on WLC B is the Exactly the same except with some IP's being reversed. I have...

I have a ISR 2811 with NME-AIR-WLC6-K9 WLAN controller. I have problem booting the WLAN controller.  When I try to have an access to the module (service-module Integrated-service-engine 1/0 session), it keep rebooting with the message : Booting from ...

Could someone recommend a good book for deploying WLCs?

HiIf I'm reading correctly Load Balancing is not advisable if using voice of wifi.On a conroler with 70.220 - Wireless - Advanced - Load balancing          Load balancing - client windows is default 5, max denial 3But on the wlan, the load balancing ...

we have a number of remote branch offices with HREAP access points. Each  office has an MPLS link back to the main office where the WLC's are.  We have IP SLA setup on the switch so that when the MPLS link goes down, a VPN tunnel is built over the in...

Hey I have a Question i am testing  mobility group with Failover for redundend connection between 2 Cisco 5500 Wlc.On both the controllers i got the mobility working And both the controllers have the same version And configuration. But when i unplug ...

Is there away to configure ACS 4.2 to only allow certain EAP-type of authentication per SSID? For example: SSIDA - only allows EAP-TLS and SSIDB - only allows EAP-PEAP on the same ACS server?Any help is greatly appreciated.Sent from Cisco Technical...

A 4402 Controller (Software Version - 7.0.98.0) with Web-auth via LDAP database works fine for a random time, two days, some hours.The LDAP in controller is configured with a user, that has bind's privilegies.I don't know why the authentication of us...