Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 17 , 2026 through Tuesday August 31, 2026. Our experts Saikat Nandy and Prashanth Bargur Hanumantharayappa will be waiting to assist you and resol...
Working on a project consolidating all controllers to a single 8500 controller with a standby. Moved an AP over to test the process and everything worked fine. Took a little longer than I thought it would, but given the design with new flexconnect ab...
Hi allCan anyone help me to solve a problem?We have Cisco MSE 3310 installed. After power failure it doesn't boot.Full log is attached. Console log is below:/dev/VolGroup00/LogVol00: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.(i.e., without -a or -p...
Hello all,I upgraded all 3 of my WLC, 2 foreign controllers (5508) & 1 anchor controller (4402) from 7.0.235.0 to 7.0.240.0.Since the upgrade I am getting users at different locations (both foreign controllers) complaining about keeping a steady conn...
Hi all,How can i change AP hostname for LAP via CLI? I got the error 'command is disabled' when i try to use command 'capwap ap hostname <>'I try to disconnect LAP from WLC, factory default, clear all private-configure and clear all files in nvram: b...
Hi evrybody,I have to buy an ISE (cisco) but i don't know if i chose the virtual or an ppliance one. could you help to make my choise with a pro/cons matrix of the two options?Thanks in advance
Hi,Can someone send me information about best practice and limitation for AP mode local (LAP 1231A/G with controller 5508 release 7.0.x), the official documentation don’t display nothing on this argument.thanksS.
I recently purchased the following license: L-PI12-LF-100 to add 100 additional licenses to our current appliance. When I tried to apply the new license, I received the following error:"Unable to add any license without an BASE license"This system wa...
Hello,I am on setting up the Cisco Prime Infrastructure Manager 1.3. I have 2 issues with 3rd party switches.Cisco says that they full support LLDP for any device but I get this error with HP-Procurve when I do a discover:feature_lldp_neighborsSNMP r...
HiWe've got a pair of identical wireless medical devices that we've been having issues with, they connect ok initially but after about 45 seconds to 2 minutes they disconnect and they won't reconnect until rebootedI can't see how this is an issue wit...
Hi my friends:Its posible to implement feature H-reap in wlan controller 2504 with iso version7.2.103.0, because i dont have this option in my wlan controller.thank.Marco
Hi friends:I had configured in my wlan controller, 02 radius server for 802.1x authenticaction. I want to kown wich radius server will use my user to connect.I want that firt use the IP:10.240.4.7 and second the IP 10.240.134.7, but allway use the IP...
HelloWe have a problem with WLC 5508 and an access point 1240 in workgroup bridge mode. A client connected to the access point can not be accessible. The access point is connected with an access point 1140 in hreap mode/flexconnect.In the release not...
Good day All,Some devices are failing to connect to my Cisco Aironet 1262 AP. So far I have noted the ipad 2, a windows 8 phone and a bang and olufson speaker. Is there something I need to tweak in my config. Other devices connect fine, that is my la...
Hi All,Can anyone please show me how to map a SSID/WLAN ID to a local vlan of a LAP in WLC 5508 using H-REAP local switched? The reason of doing this is to separate Data subnet/traffic from Voice as currently all 7925 handsets using same SSID as PCs....
We faced one recent issue with WLC configuration behavior and explaining our observation and workaround we did. If there is an alternate better approach, please suggest.RequirementRequirement is to manage the WLC (5508 with 7.4 code) using two SNMP m...
