Wireless

Is there a way to configure a 28xx series router with a HWIC-AP card as a wireless client instead of a wireless access point?  There isn't a network drop in the location that I need to place a router, but there is an active Access Point that reaches ...

I'm using a Cisco Wireless LAN Controller 5508, 14x Access Points 1041 and 6x Access Points 1031 in combination with a NCS 1.0.Is it possible to broadcast SSID'S only on defined Access Points, e.g. AP 1-3,7-10,18? If yes, what have I to do?Kind regar...

Hello!We have the following BOYD environment:WLC 5508 (7.4.100.0)Cisco Identity Services EngineVersion      : 1.1.2.145 Patch Version      : 3During BOYD implementation we faced some problems with Androind devices:1) The Netwrok Setup Assistant (NSA)...

Hi All,We just got (2) Air-lap1242ag-a-k9 units here and i am also working on (2) air-ap1242ag-a-k9 units also.my question is this, do the lap units function the same as the air-ap1242ag units?if not, what will it take to make the lap units function ...

Is it possible to have an access point use more than one SSID and associated encryption? I have access points that utilize sub-interfaces to serve differenet IP needs of work group clients. That is not the question. I have a scenario where I have to ...

Hello, recently we have upgrade the controllers WLC 4400 from 4.2 to 7.2 and whenever we replace an AP, the new one takes many reboots before associating to the controller, what could be the issue, they are taking like 30 mins to associate.... Has an...

Hi,Looking at USB adapters to do wireless site survey with Airmagnet. Have you tried any of the supported ones for N standard?Proxim Orinoco 8494Ubiquiti Networks SR71-USB D-Link® Xtreme N™ Dual Band USB Adapter (DWA-160) The D-link one costs allmost...

Hi,Can we push configuration to the manged devices through Prime Infrastructure using FTP or TFTP.The default way is using templates which require Write Access in SNMP. So looking for an alternative.All your help is appreciated.Mukul                 ...

hi,we have two wlc connected to two Nexus (WLC1 hangs off Nexus 1 and WLC 2 hangs off Nexus 2). Both Nexus are connected using vPC. when i connect an AP to join to the network for some reason the AP cant only see one WLC. so the first time it connect...

Hi Team,We are running virtual TACACS( Cisco ACS), need to check if Centrify is supported on these appliances?We want to install monitoring tool agent on this devices? I meane centtify agent on this device?Please advice is it possible.Regards,Kannan

Hello,I have the following room to cover with wifi coverage. There are 10 concrete pillars in the room. Can you please advice which Cisco APs and antennas will provide an optimal solution for covering this room.Thanks!

Are there any features in Prime Infrastructure that would require you to build a larger Virtual appliance? The example would be if I add the assurance licenses and turn on advanced traffic monitoring. I am planning to build a medium virtual applianac...

I have a few 1142N Aironets with internal antennas in place, and I am not thrilled by its coverage. I want to extend my wireless network because of a new building which led me to the following question;Is there is any difference in wireless coverage ...