Wireless

Hi, What are the possible causes of this message:AP's Interface:0(802.11b) Operation State Down: Base Radio MAC:00:22:90:9a:12:40 Cause=Heartbeat TimeoutThanks

I have one 4404 controller running version 5.1.151.There are 74 AP's which are divided between interface ap-manager 1(on port 1) and ap-manager 2 (on port 2). LAG is disabled.After a controller reset the AP's wouldn't join port 1 anymore, only port 2...

Hi All,Been having problems recently with HP wireless internal cards where they seem to drop connection every 15mins....need to do a repair in order to get connected back to the wireless lan. Is there a known issue with HP laptops?. Tried using a PCM...

I have deployed a WLAN utilising 9 1142 N AP's controlled by a 4404 WLC. The system works fine at 2.4Ghz, but for the life of me I cannot get a connection at 5Ghz using 802.11N. The a/n radios appear to be enabled, I have followed the info in the 114...

I Which to convert a WLSE to a WCS appliance I have two Cd who lets me convert wlse to WCS linux 3 and upgrade to linux redhat 4 whitch is the best way to upgrade to WCs version 5.2.130

Hi All,My supplier seems to be just as ignorant as me regarding the following:I have a disc labelled 'WCS-WLSEU-RH5-Upgrade.iso' - will I be able to upgrade my WCS' OS (running on RH4 on a WLSE appliance) with this disc, or is it actually for convert...

I have two Wireless LAN controller en the Networks. One WLC is in the building A and the second WLC is in the building B. The access points installed in the Building A, are registered in the Wireless LAN Controller A, this controller is configured as...

Is there any way to configure a WLC to automatically disable new APs (shut down the radios) when they are first booted up and join a controller?Thanks!

I have only 802.11b client in my production environment (PLC, serial converter, ecc..).On my WLC how can I configure a single WLAN 802.11b only and other WLAN with all-mode enable?Regards.Mirko S.

Does anyone know if 1252 can be converted to Mesh AP? According to WLC configuration guide version 6.0 and 5.2, only 1130 and 1240 can be converted to MESH AP. But I heard from another guy that 1252 can also be converted to MESH AP. Just want to conf...

HelloI have a problem with barcode scanners dolphin 9550, I use aegis application to provide WPAv1 authentication on this scanner. I Have strange latency times (strange for me) When I ping the gateway from scanner I have 3-15ms, when I ping the scann...

Hii am using cisco 871 router for wireless connectivity.the ethernet port is connecte to lan and users are connected to wireless interface.problem is users are getting connected to wireless network but not getting ip address from dhcp server.dhcp ser...

Looking for advice/suggestions on controlling a hotspot. looking for a way to automatically block MAC addresses that connect multiple times in a specified time period. Be great to redirect user to a site explaining why they are being blocked.Thanks

I would like to do this:For example, if the access points do not recive the Wireless LAn Controller response in 30 seconds, the access point will be registered in the secondary WLC. I would like to increase this number of seconds (in the example 30 s...