Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 17 , 2026 through Tuesday August 31, 2026. Our experts Saikat Nandy and Prashanth Bargur Hanumantharayappa will be waiting to assist you and resol...
Wap200 router. In both safari and firefox, on the mac and pc, I get "connection has timed out" screen when entering 192.168.1.1 Any other way to logon to linksys router? I am hoping to increase or make changes to the signal. As it is now, the pc, ju...
hi,today i installed one Cisco 5508 Controller with 1262 APs only with 5GHz antennas. all radios are came up excpet 5ghz band, i tried all my level of best to get it UP. can anybody tell me if there is anything we need to really inspect to enable 5 G...
HelloWe have ACS5.1, WLC 7.0 and using 802.1x to authentication users.Anybody know how I can configure network access restriction with using internal user group information.For example, under the same SSID(like that "test") , same VLAN ID.But two dif...
So I was re-reviewing the deployments guides today for the 9971 & 7925 WiFi phones when I noticed that Cisco reccomends changing the EDCA Parameter from WMM to Voice Optimized. It is my understanding and the hitting apply re-affirms that belief that ...
Hi everyone,Is there any way to export the running or startup configuration of the Access Point but in a way that I'll be able to reload it in case something goes baddly wrong?ThxVP
Hi, I am aware that I can only have a total of 12 AP's on the WLC2112, but I read somewhere that the controller has a hard limit of 254 client connections. Is this true?Thanks
Hi,When I upload a license to increase the support of the AP in the WLC 5500, The WLC is restarted??For example, the WLC actually support 25 Access Points, And I have the license file to add 25 more access points, I have to restart the WLC to the new...
I need to do a site survey using my wireless "N" AP. The AP is a Cisco 1252G.Is there any way I can make the AP broadcast an ssid without plugging it into the network and having it join the wireless controller?I will mount the AP in a hallway were t...
I have my WLC2106 on a network with no VLANs and no 802.1q. I have a DHCP server already on the LAN.However, it seems like I still need to configure the WLC to proxy the DHCP requests from the wireless clients. Is there any way for me to run the WL...
We have an instance where changes were (supposedly) made to one of the IP addresses on a WLC, but the next morning, the old IP address was there. Does the WCS automatically load a config if it sees a difference to what it believes should be loaded? (...
I have a local mode 1242 LWAP that gets dragged around from city to city as a mobile WLAN-in-a-Can. So far it phones home and re-joins it's WiSM properly. In actual use no more than six laptops can connect and that's the problem.I set the globally ...
hi! In an autonomous APs setup environment with the dhcp configured in 2 of the APs (within the same network segment), when the user move from one APs to another APs, will it caused 2 dhcp address leases in both of the dhcp svrs and caused conflict?T...
/* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabela normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm...
Trying to setup wireless on 1801w ISR. Wired access to Internet and LAN works fine (Vlan1); however, wireless (Vlan2) does not. Trying to setup wireless "guest" access with Internet access only (no access to LAN).Wireless will not come up. Dot11Rad...
Gday Everyone,I have been getting this error recently. Any suggestions out there%USMDB-3-MSGTAG030: usmdb_apf.c:262 For information regarding Emergency image Version,Please refer Controller documents. I got WLC4402, software ver 6.0.188
