Wireless

Hi all,Can anyone who got very good experiance in configuring WLC & LAP present a documentation on following aspects:1. Configure the Wireless LAN Controller for Basic Operation and Registration of LAP to the Controller.2. Implementation of Vlans on ...

Gurus, We have a wireless solution provided in a hotel for almost 800 APs with c6500 + WISMs.On each floor the AP are in the lobby and not in the rooms, the wireless data is fine but IP phones are disconnecting or the voices are choppy.Initially th...

I have 7921 phones along with 1242 LWAPP APs. I have noticed the phones resist roaming to an AP that is closer (stronger signal). I did some testing on some APs that did not have any other associations. What I found was the phone would cling to th...

Hi Folks, i tried to Upgrade 2 AP1252 from Autonomous to LWAPP, using Upgrade Tool 3.2 and c1250-rcvk9w8-tar.124-10b.JA.tar image. If i start the Upgrade Process, the Tool answers tht the Image is "... not a valid one." Any Idea? This is the only av...

My customer is using AIR-WLC4402-25-K9 with 22 AIR-LAP1242AG-E-K9 AP. After WLC software upgrade to version 5.0.148.0 the syslog is full of messages:2008-04-22 00:00:20 Local0.Error 10.156.93.66 Apr 21 23:01:20.300 ccx_rm.c:2771 CCX-3-AP_NOT_FOUND: A...

I've been having some conversations with peers about 802.11n and what effect, if any, the presence of legacy devices will have on the performance of an 802.11n network.All the references I can find online indicate that there is some performance impac...

Hi,I have an AP running C1200 Boot Loader (C1200-BOOT-M) Version 12.3(2)JA4, RELEASE SOFTWARE (fc1). When i used the web interface to add new mac addr list. I hit into an error saying: "Renaming this filter created too many changes to send the reques...

HelloI work in a school withoaround 1000 stundents. We have a current WLan network with around 75 autonomous Cisco1231 APs. I've got now 2 WiSM blades and am currently migrating all the APs to LWAPP.We have a quite dense network and up to 250 clients...

Does any body know where I can find a step by step guide for provisioning of Cisco wireless access points? Can we do everthing remotely without touching them from the box?

I know for IPT their is lots of network readiness guides. Is their anything like that for Cisco wireless (with central controler)? We looking at putting in Dell swithcs and not cisco. Anybody have any switch level feture I should be looking out for?

Hi, my questions:Can we change the security message text in NAS server? the file name showing the message is "cca_block".This message appears when a wireless client tries to access a not permited ip address or network.The message text is "Security m...

Cisco AIR-AP1242AG-E-K9 Access Point. I was wondering what directional antenna might be well suited to this device.(?) The location of this AP is in a building with lots of thick walls so power and penetration through these (in a specific direction) ...