Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
Is it possible to broadcast multiple SSIDs with an 1811W ISR? Everywhere I have searched I have found a reference to the "mbssid" command, however, it does not appear my IOS has that command. Does the 1811W support this and what IOS would be needed...
Hello, I have several branch offices (local) set up on 4400 WLC's serving local Wireless lan access. These controllers have a guest network set up that uses the mobility anchor for a controller set up in a DMZ at a data center.The guest access works...
It took me a while to get this information, so thought I'd share. Here it is:************You cannot use the upgrade tool to do the IOS to LWAPP for the 1250 APs. Here is a method to do the conversion.*Method 1 : ( Mode Button )*1. Install an externa...
Hi,I've a Cisco WLC running version 4.2, I've strange disconnections of some LWAPP access points.From the logs i can see the following message: Fri Oct 3 11:16:39 2008 AP's Interface:0(802.11b) Operation State Down: Base Radio MAC:00:1b:54:ec:db:e0 ...
Hello all! We have a several Cisco 4400 wireless controllers and a Cisco WLC, ACS server. Access points are Cisco LWAP 1242. Security is PEAP TKIP ms-chap. Machine authentication. Settings are pushed out through group policy. A new user can log on to...
I am thinking of upgrading my WISM to 5.1.151.0 for the multicast enhancement and other feathers. Has anyone had issues with this version.Is it stable?Thank YouPete
Greetings, we have been running a Cisco 2106 controller for awhile now, following a recent reboot two out of the four AP's failed to re-register with the following messages.Translating "CISCO-LWAPP-CONTROLLER.****************.local"...domain server (...
Resolved! 4402 - restricting concurrent logins
Hi, I see where I can restrict the number of concurrent logins a user may have in Security-->AAA-->>User Login Policies. However, this appears to be a global setting. Is there a way to set different concurrent login levels per SSID?........thanks ...
Hi all,I am having an issue with the above device.When I set the antenna to Right(Primary)and I apply for it to take effect, it goes back to diverse and this gives me very weak signal.Could someone be of help please?Penbee
Resolved! Contain 2nd WLAN to specific AP's
Currently I'm running a WLC 4402 with 1 WLAN. This WLAN is using 802.1X security.I need to deploy a second WLAN for barcode scanners that only support WEP keys. Is it possible to broadcast this 2nd WLAN only on specific AP's but also broadcast the or...
Can someone explain exactly what functionality would be given up, if users do not have the Clean Access Agent installed on their pc's/laptops?thanks
I have approximatley 100 1121G aps that were autonomous and coverted to lightweight on my LAN with various wlans. I have 13 WAN sites that are connected T-1 with about 20 1121G's currently in autonomous mode. Can I convert those aps to lightweight ...
hi, i am un able to find my LWAP in WCS but in WLC i can find this.in WLC the oppration status is down and in mesg's it is showing "ap is un able draw enough power".please help me to resolve this issue....regards,Satya.M
Resolved! WISM loose 80 AIR-AP1231 after reload
I have reloaded ( RESET ) the WISM from a 6500 sup 720 . After when the WISM came up I have loosed 80 AP that was previously associated with it. The logs on the WISM did not say anything important After 3 days my AP became 5 .Question : I have to wai...
How can I verify the roaming functionality?I like to identify the moment when a 7921 IP phone switch from one AP to another. Is this event reported in the controller?I have 6 AP 1242 and WLC2106.
