Wireless

Dear Experts,I need to know how I can integrate Wireless AP 1231G working with out Wirless Controller with Acitve Direcotory.Detail reply will be helpfulThanks

I have a 5505 and a 5510. They have an IPsec L2L tunnel between them. I can transfer a 1 Gig file with ftp no issues. I start the same file transfer with explorer using the unc \\192.168.0.2\c or Explorer and it fails after a random period of time. A...

Hi,I have a client that what to put surveillance cameras in railroad carriages (I think that's what is cold, in English).He what's to put two cameras per carriage.And, above wall, he what's to connect each camera directly, by wired, to one Access Poi...

Hi,Can some one tell me if there is an AP, from Cisco, that has more than one Ethernet or FastEthernet interface?Can some one help me?Thanks in advance, Rui

Are there any performance benefits to enabling HREAP (local switching) when there is a local controller present? I am aware of the benefits of users staying authenticated when the remote RADIUS server is unavailable.I assume that when doing so, the A...

When implementing NAC VPN SSO using WLC's we notice that the Windows roaming profile will not load, when accessing over the corporate wireless, I am 100% sure this is not a NAC issue as we have a wireless SSID that does not participate in NAC and we ...

What are the best AP's to use in a concert hall type venue with a large nunmber of client users and how do I make it so that they are spread across the AP's and not just filling certain ones up?

Hi,I have configured a NM-WLC on a 2800 series router.I have assigned ip addresses for the management and ap-manager interfaces on the same subnet.When I log into the WLC, I can ping the management interface as well as access it via a web interface.H...

How do I perform a Factory reset on a 521 LWAP?

What am I doing wrong? The wireless client authenticates to the router, but doesn't get an IP via DHCP? Help??

I have some 1130ag lwapp's that cannot reach the controller for some reason. They are located in a remote building connected via a ds3 circuit. The AP is getting a dhcp address via a scope built on a 3560 switch, here is the scope.ip dhcp pool APScop...

I'm relatively new to the Cisco scene and are now trying to set up the UC520, WLC526 and two LAP521. I got the UC and WLC to play nicely but the AP's doesn't recieve config from the wlc. They show up in CCA as connected to the UC but doesn't recieve ...