Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
To clarify for me - I have a 4402 controler set up, with 2 APs in this site. How many people can can connect to a 1240agp AP before degradation starts? and how does the Laptop (wireless user) know which AP to go to? Is it just the closest one, and ...
Hi! According to http://www.cisco.com/en/US/products/hw/routers/ps380/products_data_sheet0900aecd8028a976.html my 871w supports two MBSSIDs, so I could give both of my wlans a different broadcasted name.I have a current c870-advipservicesk9-mz.124-11...
WLC 4112 bootloader image is crashed. How can i get bootloader file and RTOS. The primary and secondary images are corrupted and cannot bootable now.I've tried image upgrade on GRUB and booting up but failed with "Bad Magic Number" message.
I have a new A1240 and it IOS is working with new command LWAPP and need a control server to manage the access point. It (ios) does not have configure terminal command. I think I can delete the IOS in the flash and load a older version IOS. I went...
A quick question...Does that access point have an internal antenna or you should connect an external one?
I am considering configuring a 1242ag as either a WGB / non-root bridge, I have read that a WGB can have only 8 clients on its ethernet lan side, and does not associate with wireless clients other then the root-bridge/AP. Can someone confirm this for...
Resolved! DHCP on a WAP
All,I just got a Cisco Aironet 1242AG. I have it configured but it will be installed in a conference room. So there is a need to have addresses dynamically assigned. Can I configure a DHCP pool on this AP. I found some documentation but it isn't real...
Has anyone ever gotten the 871w to perform WPA with Local EAP auth.? I tried to use the Cisco doc but it was of little help.If you have this working can you please share a config.Thanks,
am Subhasis Pal working in Indian Statistical Institute, Kolkata,India as System Administrator. We have purchased two AP-1242AG model 9 months back. one is working properly. one is getting problem after loading new ios downloaded from your website. a...
I have recently upgraded two AIR-AP1220B to IOS 12.2(11)JA1. Now when looking under the Network Interfaces I now have Radio0-802.11B and a Radio1-not installed that is grayed out. Where did the Radio1 come from and how do I get rid of it? Also, when ...
Hi,The goal of our application is a data transmission network between the ground infrastructure and vehicles. On the ground, we planned to use LWAPP AP1242 managed by a WLC. On board, we planed to use a MAR3200, fitted with 2 WMIC. In a first time, w...
Hi everybody,I'm implementing an outdoor "bridge" in WiFi.I explane:I have a 5.4GHz of backbone, then a router wich finish in a RJ45 cable (all for an XDSL). I must to use a Cisco Aironet product to bring the 802.11g protocol from the technical build...
We are a fairly large campus with approximately 150 AP's. Currently we are NOT lightweight and have deployed WDS's to locations under the 'recommanded/required' standards.. However, it seems that our WDS's seem to constantly authenticate to the ACS ...
Hi folks, In a AP 1231G-A-K9 I had a problem, making an upgrade the copy did not finish, then, right now I have the next message,Error loading "flash:/c1200-k9w7-mx.123-8.JEA"Witch is my best option ?? is there some tools for that, or xmodem is my on...
Dearthis error happened when the client try to connectsome clients coneccted then disconnected the other client couldnt connect please check the attached filesplease advice wht is the main problem and how can i fix itthanks in advanc
