I have about 20 Cisco 1121's that I configured for my boss for a project. Now he wants me to unhide the SSID and i can't find any information on the process of doing that. Can anyone help?Please and Thank you
I have about 20 Cisco 1121's that I configured for my boss for a project. Now he wants me to unhide the SSID and i can't find any information on the process of doing that. Can anyone help?Please and Thank you
Hey all, I am having an issue with DHCP addresses on my wireless network. I have 2 WAP's each configured as a DHCP server. Each WAP has a pool of 25 addresses. Some users are not able to obtain addresses and when I go and check the bindings, the one ...
When I enable diversity (both integrated antennas enabled) the signal strength becomes quite variable and unstable. It does not occur when I enable only one of the 2 integrated antennas, the signal is much more stable. Does this have some explanation...
Hi,any news about Cisco Systems and the "CSIRO" 802.11a and 802.11g infringed upon the '069 patent ?http://www.buffalotech.com/products/wireless/Dear CustomerAs you may be aware, Commonwealth Scientific and Industrial Research Organisation ("CSIRO") ...
What exactly are the differences between using L2 mode against a L3 mode for WLC?
i would like to calibrate an outdoor area in cisco's WCS, using RF calibration models.however, when i try to do this i don't get the option of choosing my "outdoor area", i have to choose a "floor".. how do i get to calibrate my outdoor area?anyone h...
I have a 1242 API have 2 other VLANs other than the Native VLAN 1.I want to use the native VLAN 1 only as the management VLAN, I donot want to bind this to any RADIO INTERFACE. Is there a way I can have the VLAN 1 not bound to any Radio.Thanks,Joel
Hi, We're utilizing an external distributed antenna system for wireless, so the APs (1130)go in the closet. Right now we're just stacking the APs on a rackmount shelf, but we'd like to have a rackmount holder to keep the APs from falling and generall...
The "Failed Attempts" log on the ACS 4.1 began showing entries that I do not understand. The backend is Active Directory.Basically, the entry it is in this format:date,time,authen failed,foreigndomain\user,localadmingroupname,callerid,External DB use...
Dear Sirs.I'm trying to configure two 1242AG access points in order that they operate in bridge mode.I set the role of my first AP as Root bridge, when I set the role of the second to non-Root bridge. After this I see that 802.11g interface of the se...
We have been using 802.1x machine and user authentication via MS built-in supplicant (PEAP, MSCHAP-v2) and MS IAS (radius) backend on a wired network for about a year.We recently migrated our 802.1x platform to CSSC 4.2 and ACS 4.1. I soon discovered...
Hello,I have an issue where we are using 1130 autonomous APs throughout the office (all on the same subnet) with 802.1x EAP-TLS employed and users are authenticating to IAS (Radius with back end AD). There is an application that is on wireless tablet...
I am working on a 1242AG running 12.3(3G)JA1. It's setup with Radius using PEAP-MSCHAPv2. I'm having a problem with the AP assigning ip addresses to machines after user is authenticated. In the AP it shows the client as EAP-Associated but the wireles...
I noticed the other day that there are jumpers inside the 1010 APs and I was just curious on if anyone knows what they are for. I've searched the net with little luck on finding a document that explains this.It's all just morbid curiosity, but who kn...
Hello,My company bought a Cisco Aironet 1130AG to use as simple AP. But we have a little problem, it has the IOS version 12.3(11)JX1. It seem that this version can't be turn to autonomous mode.I think that i need to change the IOS for the version 12....
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 11-16-2026 05:39 AM | ||
| 11-12-2026 01:01 AM | ||
| 10-15-2026 05:58 PM | ||
| 10-12-2026 06:46 PM | ||
| 09-30-2026 07:34 AM |
| User | Count |
|---|---|
| 5 | |
| 2 | |
| 2 | |
| 1 | |
| 1 |