Wireless

I have a network with 3 350 AP's with the latest software using channels 1,6,11 inside a plant. I have a strong signal at all client locations.Stations are randomly dropping their connection to their application. They are running mostly thin clients ...

Hello:Can some tell me either if the three non-overlapping channels of an Aironet AP (802.11b/g) or 8 channels in 802.11 be active simultaneously to support so I can have 3 different subnets in 802.11b/g and 8 in 802.11a. Thanks

Hi, When I update the drivers for the Cisco 350 wireless card IAS fails user authentication.We are using:Win2003(IAS) - PEAP MSCHAPv2Cisco AP 1200 - 12.2(13)JA1WinXPSP1Driver version 7.50.01 works OKDriver version 8.5.24.0 FAILSWe have tried updating...

We have Cisco 1220 AP's at various hotspots and Windows XP Pro clients. Is there a way to prevent our clients from associating to other SSID's? We only want them to associate to our company SSID.

Has Cisco made any comments on this and their WLAN equipment?See links below:http://www.techworld.com/mobility/news/index.cfm?NewsID=1551&Page=1&pagePos=5http://www.auscert.org.au/render.html?it=4091

Hello,This may be easy to many of you, so I hope to gleen some of your expertise. I have two buildings 400ft apart. I have an access point (1200) and a yagi antenna pointing from one building to the other. What device will I use in the receiving b...

Hello wireless Gurus:If I have 11 clients talking to an AP (both clients and AP in 802.11b ) dos each client have a data rate of 11 Mbps or 1 Mbps each? Are the clients talking half duplex? Thanks for reply in advance.

Does anyone know if the 340 adapters support EAP-Fast? The docs that I have looked at talk about 350 adapters... I thought the only difference between 340 and 350's was the anntena.

Does anyone find the Network Configuration section of ACS a litttle cumbersome? The more devices you have the more you have to scroll down to get to the add button

Hi guys I have a question, we have two active PDSN's that connects to one HA, but i don't know if that will give us some troubles, for example:Let's think taht we have 3 PCF's that use one of the two PDSN, then the PDSN pass the call to the HA y make...

We recently replaced a T1 line with a wireless point to point using 350 bridges. Since that change we have not been able to telnet to the Catalyst 2950 switches on the other side of the wireless link. We can telnet to other devices on the other sid...

I normally configure A/P's to "Restrict to SSID" in a loss of Backbone connectivity situation. I have an account that wants the A/P to "Shut the radio off" when a loss of Backbone connectivity occurs. While testing the behavior, everything worked ...

Hi everyone,I have a system that collect information provided by code bar, and these application works in MS DOS, but I am experienced problems when my wireless network is with WEP 128 Key enable on AP and in client.My question is the following: Ther...