Wireless

I have a potential customer wanting to implement multiple "Rural WISP" (term coined by the FCC, search google) using 802.16e like(WiMax, non line of sight) equipment in multiple rural cities. They have investigated the Motorola Canopy and Navini exte...

this Error is flooding my two 340 root Bridges. Does anyone have any idea what this mean and how to fix this error?

PLS GIVE ME A PROCEDURE TO AUTOMATICALLY DISTRIBUTE PEAP CERTIFICATE TO WIRELESS LAPTOP'S INSTEAD OF MANUALLY UPDATING PER INDIVIDUAL FROM THE CA.

I am trying to configure 2 APs 1200: - 1 AP as root station - 1 AP as repeater I have respected the Cisco rec for this issue but still on the dot11 radio 0 interface of the repeater station : reset / down as status/protocolBellow my root/Repeater con...

After fighting with AD and directory services and then my LEAP Authentication server, I found one of my 5 1200 APs wont allow me to connect to it via hard wire web browser. Currently all the indicator lights on it are Amber in color. I have yet to fi...

My client is insistent that it is safe to install a lightning arrestor (AIRACC3354) directly onto the RP-TNC Connectors of a 1200 series Wireless Access Point. Is this something that I should advise him against or is it safe to install it this way?

I need to setup the AP-1200 I have for EAP-TLS. Anyone know of some good documentation that I can use to configure this? I already have the CA and RADIUS servers up and going.Thanks in advance for your help.

We've just recently purchased and installed our first Aironet 1200 series AP (1231G with a single .11g radio, running 12.2(13)JA3 system software.) Completed initial configuration and testing, and we were able to connect with three different clients....

After trying this upgrade in both a 1200 and 1100 series AP I am extremely disappointed in the througput I am getting.Even when set to "G-only" and operating in an area which is free from any other RF traffic I can only achieve 20.5Mbps.Perhaps I hav...

I get the following error when trying to do a Assisted Site Survey:ERROR: Measurement request ACK timeout from WDS134.53.52.239/134.53.52.239This device is managed in WLSE and is available by SNMP. Currently we have all access points including the WD...

Hello forum,I have configured wireless client to perform EAP/TLS authentication via AP 1200 to Cisco ACS and that's works fine.My question is how the process described above can be performed before log on to the domain so i can get an ip address and ...

We have great coverage with the use of the 350 bridges, but we are unable to keep a wireless connection with our mobile equipment. Our mobile equipment averages about 30 mph and after about 10 minutes our radios go into limbo and we have to manually ...

hi,i 'm trying to manage a wilan via snmp and i have some difficulties to recover data from my access point cisco 1210 : when my laptop is connected to the access point, i can't find its ip adress or mac ( the AP takes me the ip adress of wired devic...

User uses EAP-TLS - he installed certificate but now we dont want to permit him access to our wi-fi network. How to disable his access????