Wireless

Hello,I believe that VxWorks 12.04 does not support 802.11g radio modues. Am I correct on this assumption. I believe I will need to upgrade to 12.2(13)JA2 in order to install and configure the 802.11g upgrade kit. Does anyone have an links to documen...

Which NMS is used for managing 1100 series APs with 802.11g compliant? WLSE software does not support 802.11g as i saw in WLSE data sheet.

I'm having trouble getting the WLSE to complete a AP Radio Scan. I have setup WDS with two APs (1220 & 350), ACS Server, and WLSE on the network. At least the Radio Scan doesn't fail anymore but it still doesn't work. Here is the log:INFO: Executing ...

I need to get serial numbers from access points that have been deployed (poor bookeeping on my predecessors part) I can't find a way in the webinterface or by telnet. It would take forever to go to every physical location. Any ideas?

Can someone point me to a source (or sources) that has a table of minimum recommended signal-to-noise ratio and receiver sensitivity for each 802.11a and 802.11g data rate?

These may be some simplistic questions. An access point issues beacons at the lowest possible data rate, for example, 1 Mbps for 802.11b, correct? Will it send the beacons out at that 1 Mbps rate even if the AP has been configured to not transmit dat...

We recently setup a wireless network in our warehouse using all Cisco 350 Access Points and for the most part, it works fine but intermittently, maybe once a day, but not every day, for anywhere from an hour to 2 hours, mostly in the morning, it just...

HelloI have a problem with my 1230 Access Point. I have some VLAN's configured on it. One for voice with 7920 phones and another for pc's. All works fine until i have put the radio ugrade modul into this ap.The upgrade is from the b standard to the g...

Hello,i have the following problem: Users come in via WLAN on several AP1200 and are authenticated against a ACS, which forards the authentication request to a Novell RADIUS. For the WLAN is LEAP used.Unfortunatly the usernames which come from the WL...

I want to know if is possible to secure the connection between 2 workgroup bridge 350, because now only wep 128 bits is up.Whats the possibilities ?RADIUS ??THANKS in advance.

I have 2 Dell laptops with the truemobile 1300 package trying to connect via the Aironet 1200. The Aironet is configured with 40 bit WEP and nothing else.They are associating but both do not pickup IP's via DHCP. Looks like no traffic is passing at a...

just upgraded my 802.11b client card to a 802.11 a/b/g card. I have quite a few profiles built for the "b" card. When I export from ACU - the profiles export with a .pro extension.the new ADU wants to import with a .prf extension.Is there a way to co...

Hi. As many of you probably have this setup already can i ask the following?I want to use my AP's and WLSE to provide WDS services so I can do site surveys and rogue AP detection etc. BUT I also want to use PEAP with TKIP/WPA, as I have working on a ...

I configured MAC authentication on the ACS for AP1200 and have a question for the report interface. .MAC authentication works fine and I can see a record the failure report but nothing for others. I want to see a "Login users", "Accounting", "Passed ...