Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 17 , 2026 through Tuesday August 31, 2026. Our experts Saikat Nandy and Prashanth Bargur Hanumantharayappa will be waiting to assist you and resol...
I can not associate with the repeater unless the repeater is associated with the root , The repeater associates with the root for some times and then disconnect , it is not stable and I can not associate to see whats going on . even when the repeater...
I upgrade a test AP to the new code of IOS for the Aironet 1200s. Before the upgrade we were using LEAP for authentication and it worked fine. With the upgrade, I can not get LEAP to work. We are using Cisco ACS 3.1 for our Radius servers. I believ a...
We have a 1220 AP with the A-band modular card and the b-band mini-pci card. Can you assign each SSID a different name in the same unit? In the setup guide for a dual band AP, they are both called "tsunami" by default. I want each band to be recognis...
Hello,i try to connect xp client with ap350 acs 3.2 and aceto the network.When i try to connect to the network ,get on the acs3.2 the error msg ,,external db authen.failed,,.For every help thanks a lot.Harald
Hello,I need to know if Cisco is officially supporting Aironet 350 client firmware 5.20.17 with DOS drivers. The software seletor tool shows 4.25.30 as official for DOSAs far as I know firmware 5.20.17 is official only for Windows versionsNot even Li...
dear memberswhich AP will support hotstandby feature, i want to provide a second AP as a backup.any details would be very usefullthanks and waiting for the solutionregard
I have questions about WGB350. Is the WGB350 supported for PEAP?- If yes, does it work with Active Directory?Are there plans, for the WGB350 to develop further?- new SW versions, IOS?Regards.Marcel
I need to encrypt client adapters and make them ready for use without the need to configure it at the client machine. Is there a way ?
I am facing a problem with my Wireless setup,It was working fine but all of a sudden from past few days iMy clients are not getting authenticated , When i see the logs on the Access Points i c the message "EAP retry Limit Reached for station XXXX" St...
I know I can authenticate repeater AP, but I don't if I can authenticate users who try associate with repeater AP ?? So I have root AP which is wired connected with RADIUS server (through switch) and repeater AP, and I want wireless clients to authen...
I installed a wireless network using CISCO AIRONET 1200 APs and presently accessing AP through Internet browser using plain text password. I would like to know if there is any way I could implement TACACS+ authentication to get access to AP. Thanks i...
I am trying to find what vendors wireless cards will work with the Cisco 1200 access points that will be using an ACS server to authenitcate. I know that the Aiport Extreme and the Linksys WPC55AG supports LEAP.Does anyone know of other vendors that ...
I've recently installed WLSE 1.3 and upgraded to 2.0. On both versions I'm not receiving snmp traps from the WLSE on my network management system.Syslog is working a treat.When viewing the ADMINISTRATION->Appliance->snmpd.log I get the following outp...
I need to configure another repeater hop to the root , I already configured the first repeater and its working fine , Is there any special configuration for the secound repeater , note that the parent I use for the secound repeater is the first repea...
Is it possible to configure an Omnidirectional Bridge Antenna as Directional.Actually my customer has connected two of his sites using AiroNet 350 wireless bridge at both ends. One wireless bridge has a Directional Antenna, and the other one has Omni...
