Wireless

Has anyone tried to connect a tablet PC with inbuilt 802.11b mini PCI card to a Cisco wireless network? (OS: windows XP tablet edition)After setting network keys in the windows control panel, the tablet connects to the wireless bridge and authenticat...

I've managed to retrieve the MAC address, Client Device Type and AID for each associated station on the Aironet 1100 using the cDot11ClientConfigInfoTable. However, despite dumping the whole MIB from iso.org down, I can not find the StationName, IPv4...

Can anyone tell me how they are configuring an Aironet 1200 using HyperTerminal? I start a hyperterminal session and it seems like all that is happening is the cursor is blinking. All I need to do is configure an ip address, subnet mask, and gateway.

We are having a problem with Client machines all using the Cisco Wireless cards and the Cisco Aironet Client Utility. When a user who runs WEP on a Home network comes back into the office and switches onto our LEAP network they are not getting an IP ...

Sorry, but I do not know how to see what firmware version has my BR350 running now. Can somebody tell me please?

Im all for Cisco Wireless product I use to work with Cisco routers and other Cisco stuff. Im really new to Cisco wireless equipments but I think it is the best wireless equipments so far.OK, I just say so because of my previous experience with other ...

I have 2 x 350 bridges that have associated and authenticated and have been working fine, then after approx. 24hrs they 'Disassociated due to inactivity'.I've power cycled both devices and they have re associated/authenticated, but I still cannot con...

Hi,I've managed to sort of get eap-tls setup and working. Here is the deal though. 340 AP, 350 Client card, W2K RADIUS Server, EAP-TLS auth, rotating WEP keys. When I insert my 350 card into my notebook and watch the ACU status screen, I see that it ...

I have an AP352 that shows no errors (that I can see) on boot, appears to be configured correctly, latest firmware, clean config, shows the Requested and Actual status of the radio is up and up, yet shows no traffic on the radio interface. I don't se...

We are using Cisco 350 Access points and manage via wavelink mobile manager. Everything is working fine. We enter the MAC address of the notebook befor eit is able to gain access. Now, when I add the MAC address notebook is able to get on to th einte...

Greetings all - I'm testing out this new Aironet 1200 (I'm comming from Orinocos) and its ability to allow access only to those MAC addresses which I specify. I've tried to follow the directions, but I seem not to able to do this. I have hundred of a...

if somebody as an evaluation of the overload generated by the encryption (static or dynamic) on an AP1x00 , I'm interested in, thank

Has anyone had any success using a Cisco wireless card, either the 350 or mini-pci in a Centrino laptop.I'm trying both cards and the ACU ver 6.0 is not allowed to control the card. The cards work when controlled by Windows XP but the card won't asso...