Wireless

I only want to know that under the frag threshold option the number refers the ip packet size or the MAC frame or this number contains everything also PHY overhead?

I currently have a Cisco wireless LAN solution engine that is reporting several "FCS Error is in Overloaded state" messages on several access points. and also"Packet Error is in Overloaded state" These error messages will be followed by another messa...

Hi!I cant' find anything that correctly describes rts threshold and fragmentation threshold.I konw what these terms mean! But I don't know that for example the packet size of the rts threshold option is what kind of packet.It is just IP packetor this...

Are there any design guidelines or known problems within a WLAN when using a DECT Phone within the same coverage area as Wireless in terms of do's & don'ts and frequency 'black holes'?

What is the best way to setup a 1200AP to authenticate to an ACS server for administration? It looks like in 12.0T it supports this funtion and can authenticate using TACACS or RADIUS. I can get the 1200AP to forward the requests to the ACS server bu...

Can anyone tell me if it is possible to set up authenticate admin access to an AP1200 running the 12.00T code.I'm using ACS ver 3.1 All other devices (routers switches, VPN 3000, etc..) all authenticate properly.Thanx

Do you know if you can buy an adapter to get me from an Aironet 350 bridge to an Andrew antenna? We are using Cisco cables but I am trying to avoid buying another $50 cable. It seems like there should just be an adapter to do this but having trouble ...

Does Cisco plan to develop IOS CLI for all aironet devices(especially 1200 AP and 350 Bridge) like 1100 series int the future?

hello engineers ,i want to implement a wireless lan based on air bridge , but i got confused because i dont know what is the exact part number for these device ;i think the series are 1200 and there might be sub models .

Hi to all,I have a question:having an AP with 2 PCMCIA slots I’d like to have all the clients to be connected to a wireless card (e.g. channel 1) and the same AP connected to another AP as a client by means of the other wireless card (e.g. channel 2)...

Is there a way to use SNMP program like MRTG to keep track of number of user per AP devices?

Has anyone else noticed a noticeable slow down after updating to firmware 12.00t? I also enabled WEP at the same time so I backed that out thinking it was the problem but network performance is still not good.TIA

Hello, First shot at configuring a 1220 A/P (v.11.54t) and a 350 card (V.5.01). Right out of the box the laptop connects to the LAN. DHCP works but no DNS. THe A/P, DHCP server and DNS server are on the same VLAN. I have enabled DNS on the A/P and it...

hi, i want to know what IOS, MODULES AND CARDS i need to connect a cisco 3640 router wireless point to point, to transfer ip voice or data.Please send me the part number for the modules and cards.Thank YouFederico Leon Castro.

I tries 0 or FFFF, but they do not work. Anyone knows?Thanks,Audie