Wireless

I was asked to 'fix' a BR500 implementation with poor signal strength.I need to improve the System Operating Margin by adding gain to the receive side, but the manual does not show dual connectors (like the 340/350), so I can't do it unless the card ...

Hi, Im starting a Wireless ISP in my area. The main office sits about 1000' about ground level with 3 large cellsites within 5 Miles of eachother. The idea is to use 5.8Ghz Dish Antennas to push 50MB from the Office to each cellsite. Then I'd like to...

Hi,I'm trying to install a Aironet PCI352 PCI adapter card in a Compaq Deskpro 4000-5166 MMX (166Mhz) running Windows 2000. It detects the card ok and installs drivers, but when I try to reboot, it crashes before I can get into BIOS settings. It seem...

Hi,Still dealing with the filter configuration on AP350.Filters can be designed based on the ETHERTYPE, IP protocol and IP port. Focusing on ETHERTYPE filters, how can I filter out 802.3, 802.2 frames ?Thanks and best regards,Guy

Hi there,I am trying to determine the best products to improve the strength of a wireless network I manage. This network is located primarily in a 5000 square foot building. I use a 340 series AP and 340/350 series PCI and PCMCIA cards. Performance i...

I am setting up a link of around 13 miles but I won't be able to match antenna height at both locations. The root system's antenna is at a hundred and twenty feet and the client node's antenna is at 75 feet. I would like to know if there is a place I...

Has anyone out there managed to get Hot Standby working on a secured WLAN with LEAP? I cannot manage to get my clients to do anything more than roam to a different AP with LEAP. When I enable the standby on the second AP and take down the Ethernet on...

himy cisco br342 bridge firmware is 8.24v. i wanna upgrade it to 8.65 or higher. how do i this?would you please tell me that what kind of Firmwares is best for me.i have two aironet342 Bridge, and have 4Km distance from eachother.and i have 2 Andrew ...

I've been having a recurring, intermittant problem with DHCP-assigned IP addresses not getting assigned to Aironet 350 equipped Compaq iPAQ PDAs. I've upgraded the card (4.25.23) & AP (11.10T) firmware to the latest versions. iPAQ client software is ...

Does anybody know if the Compaq iPAQ PPC2002 supports Cisco's Aironet 350? I see drivers on Cisco's website for Windows CE 1 - 3 but nothing for PPC2002.Ben

Does anyone hasused 350/340 series pcmcia Card with Ibm OS/2 ? Does Exist any drivers ?Thanks

Can anyone help with this request???? It is for a school project and I need detailed info on wireless drivers.ThanksMike

I need to provide wireless Internet accesss to many customers that already have Cisco 340 series client adapters installed on there systems. Some of these customers are 20-30KM aways. Can 340 Series base station do this job.

Is anyone using Cisco ACS in a mixed NT/Netware environment? I can authenticate using the NT database, but am unable to obtain access to Novell Resources. I can log into my NT account and get access to NT resources, but am unable to see Novell Resour...

We were using UC4800 universal clients connected to P.C.'s and printer via straight thru ethernet cables to attach to the network(AP4800E). Because Cisco no longer manufacures the UC4800E we purchased the Air-WGB350. It appears that we now have to us...