Wireless

I want "restarting" BR340/350 by SNMP. How do it ?Like ".1.3.6.1.4.1.551.2.2.4.1 i 1" for BR200(Arlan640) ?aleks.

We are running a lot of BRI340(11Mbs 1/2 Duplx) wireless bridge links with multihops i.e repeater sites.We use the same unit all the way through.The two units at rptr site is connected with crossover utp >o.5m.Supposed Throughput is 4.5Mbs but testin...

[email protected] Sir , I am Planning to setup of a Network through wireless, But I am Confuse which product I will use .. CISCO Aironet 350 Series .. but I have to give a setup in 5 place in that case on station is in Middle & rest of the p...

I have heard that Cisco is telling its customers that because of the security issues associated with wireless that if they really want to be secure they need to use VPN client software and concentrators. That means putting all of the wireless access ...

The 'SSID1' field gets changed to all vertical-looking bars or boxes when the client associates with the AP 350 Access Point. I can change the SSID back to 'johndoe' and it associates for a couple of seconds, then unassociates. If you go back into th...

Does anyone have a list of installer across the country who specialize in 802.11? Working on a national project that will require the help of installers and network management.Thanks, [email protected]

I have implemented a Cisco Wireless LAN with Cisco Aironet 350 Series AP's and Radio Cards. We were concerned about the issues with Static WEP and have implemented a Cisco Secure ACS Radius Server to provide Dynamic WEP (Leap enabled on the Clients)....

When an AP is set for all data rates (1,2,5.5,11), does it drop to the lowest common data rate? In other words, if a client is connected at 2Mb, will the AP drop to 2Mb for *all* clients sessions, or can it adjust to multiple data rates for multiple ...

Other than the standard CISCO AP , NIC and RADIUS server,is there any recommended product (hware or sware) I should be looking at before attempting to put a basic wireless LAN together...First time attempt

Hello, I have a used router that I bought to study for my exams When I console to the router it gives me a password (after the router checkup) which I don't know. How do I get rid of that? Is there anything like "format" on this router? Any help is n...

I want to connect some Aironet 350 bridges with another one in a centralized location to achieve a wireless communication that let me not to use leased lines or something like that.The distances are large, so I'll use a dish in the satellite location...

Do both Tacacs and Radius support CHAP bi-directional Authentication?

This customer is keen to build a MAN with 802.11 bridges, and run AVVID IP voice as well as data over the links.My questions are 1) Can the Aironet 350 bridges encrypt the link and re-key at regular intervals, and do you do this with WEP as it looks ...

HiI have configured my Aironet AP350 for two type of client. Client that are EAP authenticated and client that are MAC authentication. I want that EAP client have access to all my network resources and that the MAC client have access to only few reso...

I am planning to install about 80+ AP's in a school. but they want different frequencies set on each AP. They want more than one frequency running on some. Is that possible on the 340 series. If so where do I set that up?