Hey Community! I'm excited to share something we've been working on that I think will really resonate with many of you managing wireless networks today. We just released the Cisco State of Wireless Report 2026, based on insights from over 6,000 wirel...
Forum Posts
Hi all, What is the different between NSNT and SNT? I only familiar with SNT, not NSNT.So whats different NSNT from SNT? Is it same thing? Thanks,Hafiz
Resolved! WLC 9800 "site" scope
Hi,Now with the new configuration model for 9800 WLC I wonder which is the recommendation for "Site" definition. I was unable to find a document that clearly explains it. For a campus deployment for example, would a "site" be a building? the whole ca...
Hi, we are using a virtual Cisco wireless controller: software version, 8.3.141.0 with basic configuration. but our users facing the issue of disconnection and mostly are Apple Iphones 1. simple SSIDs with WPA2, AUTH PSK2. All Access points configure...
Hello,We have noticed a high CPU/Memory usage for both vWLC version 8.1.111.0 and our MS DHCP ServervWLC is configured with DHCP ProxyWhen sniffing the traffic on DHCP server I noticed that WLC's Wireless Interfaces are constantly sending DHCP Discov...
Hello all.Could you tell me more details about troubleshooting 802.1x authentication with a certificate?My topology is:Microsoft Windows Server with Radius Server <------> WLC 5520 Controller <------> AP access point <------>Client laptop.The goal i...
Hello all, I'm beginner of the world of wireless , and i need your help. I would like to know the configuration and intergration between Cisco CMX 10.6 and Cisco Prime infrastructure . Could you help me please! Best regardsAkram
Resolved! Antenas para MR66 combinación
Buen dia comunidad,Por favor me pueden ayudar en algo.... Se puede hacer una combinacion de antenas en un AP MR66, conectar antenas MA-ANT-25 y MA-ANT-20?. Si no es posible, cual de las dos antenas es mejor para este AP?Muchas gracias por la ayuda.
Hello community ! I need to create meraki BoM in CCW of different products, where can I find the sku of licences, because the hardware SKU is written in the datasheet. I need umbrella licence SKU and DUO licence.Thank you for your help.Best regards,S...
I have installed a 9800-CL instance in my VMWare environment. It boots correctly and i can login to it via VCentre console. The WLC says it has a single network interface - Vlan1. I have assigned a suitable IP to the interface. 'show int vlan1' says ...
Hi Guys, I have Cisco AP3802 in production and recently upgraded my WLC to 8.5.140.0 because of some bugs. But, after the upgrade some of the APs sometimes became unresponsive to serve clients for several seconds. I'm not sure what happened but the A...
I have setup the wap 581 with 2 SSID and I cannot stream anything for more than 30 to 40 sec without rebuffering however the 30 bux ingenious ap can on the same network without any issues. Hope someone got a trick to fix this issue?
Hi, We have a WLC 9800-40 (16.12.4a). Sometimes after successful authentication against RADIUS, by a user in a WLAN 802.1X enabled, User Name remains 'Unknown' in the controller monitor, despite being associated a long time ago. Because of that, our ...
I am using 5520 WLC and AP 9120 with 8.1.102.0 code to authenticate clients via ISE 2.6 using Novel LDAP as identity source.It appears that MSCHAPv1/v2, EAP-MSCHAPV2 and PEAP are not supported on LDAP. Please advise the possible ways to do it. Its ur...
This event is an opportunity to discuss the LTE market trends from a consumer perspective, highlighting the 4G LTE service from Cisco Enterprise BU. Furthermore, we will discuss the strategies to consider, taking into account the details for the ado...
Hello, Can we do proactive monitoring using PI 3.8, So that we can mitigate issues before it happens.
