Showing results for 
Search instead for 
Did you mean: 

Insider User Research program


Forum Posts

Hi,   In Cisco WLC release notes I see that a vWLCs can have the ports total traffic of 500Mpbs (in FlexConnect central switching mode). I think that in FlexConnect local switching mode the total traffic limit (per AP) would be the AP Ether...

Recently I bought an AIR-AP1852I to use in my office.I have never had a Cisco product before. We always had some cheap consumer APs before. I connected the AP to the energy, and connected the POE port to a switch on my network.The AP started showing ...

Hi,   I am trying to find a document on how mobility express deployment handles wpa2-enterprise authentication.    The question i have is: Do all APs authenticate against clients against the radius server directly, or does the leader of the ME deploy...

haroonz by Level 1
  • 2 replies
  • 0 Helpful votes

I was previously running 8.5.131 with FRA and DCA with "best" channel width, using 2700 series AP's. With .131 the DCA selects an 80MHz bandwidth for the 5GHz band on all three AP's. With .135, it reverts back to 20 MHz. To me this seems like a bug. ...

Release 8.2.145.x Interim (8.2MR5) Final  code is now posted, thanks for your interest! New Updated version This release adds the following functionality: TKIP  support for 2800/3800/1800 CSCvc18129    Crash on RF...

Hello All,   Hardware: WLC2504   I want to modify the "Session Timeout (secs)" setting located in our Guest WLAN > Advanced > Session Timeout. I just want to increase the timeout value and change nothing else.   If I modify only this setting and "Sav...

I recently acquired an air-ap1532E-UXk9 but I do not know how to set it up. Also I don't know the IP address but I looked through the manual and couldn't figure it out. I connected an Ethernet cable to the console port and my computer. How do I acces...

Milon77 by Level 1
  • 2 replies
  • 0 Helpful votes

Resolved! WLC3504 + AP1142N

Hi everyone,   can I use an Aironet 1142N Access Point with a 3504 Wireless Controller?The 3504 WLC is shipped with firmware 8.5, but the latest release for the AP 1142N is 8.3 Many thanks in advance!

AEPC by Level 1
  • 3 replies
  • 0 Helpful votes

Hi all,   Our team has run into a unique issue when trying to test our newly implemented captive portal. Upon testing on Apple/iOS devices, the portal displays with no issue and functions exactly how we would like. It's a different story on Android, ...

Hi everydody!!!   I have an one problem, when I just made or reconfigure one SSID and the apply for all APs; all my wireless clients have a disconnect from the wireless network, this is normal???, or I missed an one extra configuration?   My features...

Review Cisco Networking for a $25 gift card