Wireless

hi All, I have a scenario of Flex connect AP's in a site. This setup works fine with central switching. But doesn't work with local switching.I would like to know what all needs to be done in getting this working perfectly.Starting from Switch port c...

Hola, Tengo un AP que converti a AP autonomo el AP tiene una IP fija, ya configure en el un SSID a traves de la config. express pero al conectarme no me da DHCP trate de buscar alguna opcion desde la GUI pero no encuntre nada y desde la CLI configure...

Hello,   I can't understand why if I have a WLC locally in the site , so it is better to make APs in  this site in local mode, while I can see the if even the local APs are in flex connect-locally switching modes so this will give more availability t...

hi all, I already add mac bluetooth of device but on CMX can not detect it. anyone can help me. i don't know if i need to use AP 2700 detect bluetooth work need adding config on WLC or AP. CMX can not detect bluetooth smartwatch by Aironet 2700 AP it...

Hello , I need to convertiing the controller from a LDPE to a non LDPE . i found the link how to do it - https://supportforums.cisco.com/t5/wireless-mobility-documents/converting-a-ldpe-controller-image-to-non-ldpe/ta-p/3123739   My question is to ge...

Hello All,    I have a HA cluster in which Active WLC fails very often and secondary takes over. when ever I get to see such alerts I try to check the power if this could be the issue. ( but I have a stable power connection in DC) and I try to force ...

Any idea how to change to English?   Couldnt find the language settings in Mobility Express, and have checked my PC language in Control Panel- Region and Language is selected English.

SpoilerI am planning to deploy 39 access points 1832i or 1815i with mobilty express. Will this work if i connect access points to diffent access switchesI am planning to deploy 39 access points 1832i or 1815i with mobilty express. Will this work if i...

Hi, We've connected a new AIR-CAP2702E-H-K9 to the switch and POE status at the WLC fixed to medium power (15.4W), while at the switch part the maximum power can provide for AP is 30W. The Old APs were AIR-CAP2602E-K-K9 and they were in full power st...

Hi,  We have two WLC on HA, and 3 SSID broadcasting in different interfaces, but some clients does not receive any IP from DHCP, the client policy manager state is DHCP_REQD or 8021X_REQD regardless is not an 802.1x SSID. we are running code version...

AP 3800i showing on WLC5520 "PoE/Medium Power (15.4 W)" connected with switch Catalyst 9300. I have 36 APs connected on WLC 5520 but only 6 APs show the protocols Down "PoE/Medium Power (15.4 W)"..