Buy or Renew
Buy or Renew

XR OS and Platforms

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation

“Take

 

Forum Posts

Start a conversation

Resolved! BVI interface not coming up

Hi, I created a BVI interface but its not coming up RP#show l2vpn bridge-domain detailThu Nov 5 02:46:14.610 UTCLegend: pp = Partially Programmed.Bridge group: vlans, bridge-domain: vlan100, id: 0, state: up, ShgId: 0, MSTi: 0Coupled state: disabledV...

Resolved! Advertise EVPN IRB Host-Routes in VPNv4/IPv4

Is it possible, on the same router, to advertise EVPN IRB adjacencies in VPNv4, and vanilla IPv4 unicast? They advertise in EVPN as RT-2 just fine, but we have some VPNv4 and IPv4 (VRF-Lite) peers we'd like to advertise those host routes to as well. ...

zcayou by • Level 1
  • 2175 Views
  • 4 replies
  • 0 Helpful votes

Resolved! BGP IPv6

Hi, Guys, I'm facing a problem on BGP with IPv6 family unicast, Router A with IOS-XR and Router B has established the BGP IPv6 neighbor but they're not able to advertise the prefixs(IPv6 address of loopback 0) to each other.BTW, they're not in the sa...

Resolved! ASR 9010 Temperature Threshold

Hi I would like to find the temperature threshold value of ASR9010.admin show environment temperature, it shows only current temp value.admin show environment table will only have critical value, no minor and major value.Could anyone provide me this ...

Resolved! ASR9001 Upgrade path issues

Hi all,l am running a 9001 IOS-XR image - Currently 6.1.4I need to upgrade this to 6.6.3 , but I am unsure of the upgrade path, can I go straight from 6.1.4 to 6.6.3/6.7.1 or will have to increment to specify versions?- l checked the Cisco download p...

IOS XR

Hello:Which Cisco router platforms use IOS XR?Is it just the CRS-1, ASR 9000 and GSR 12000? What about the asr 1000?What is the big difference between regular IOS and IOS XR?What is the ASR 9000 used for? WAN edge? SP PE? SP core?So for so many quest...

visitor68 by • Level 5
  • 15782 Views
  • 11 replies
  • 0 Helpful votes

ASR-9006-FAN-V3

When would this FAN be required for a 9006 system?  I see PEM-V3 on Cisco site but nothing on the V3 Fan.  Anyone have any links or input?  Greatly appreciated!We are currently testing the RSP-5 we got on loaner.  We have used Classic 32 bit only and...

PK99 by • Level 1
  • 712 Views
  • 0 replies
  • 0 Helpful votes

NTP PTP Interworking issue

Hi community!We have a couple of ASR 9901 with IOS XR 6.6.3 (all SP and SMUs, i hope). The ASR9k box is connected in a chain of PTP G.8275.1 and the chain is using SyncE as frequency synchronization. I my knowledge, we do have PTP and SyncE working. ...

jhalldn by • Level 1
  • 799 Views
  • 0 replies
  • 0 Helpful votes
Load more
Top Solution Authors
View All