MTU for SVL

Is it necessary to change the MTU for SVL links in a scenario in which interfaces are configured with MTU larger than default 1500 bytes?Traffic could flow between chassis through SVL links in a Stackwise Virtual cluster. Could not find any reference...

CBS350

Estimada Comunidad,Me pongo en contacto con ustedes para solicitar su amable asistencia con el proceso de restablecimiento de fábrica de 2 switches modelo Cisco CBS350-24FP-4G que he comprado de segunda mano.Necesitamos realizar una limpieza completa...

How to Find Warranty of the CISCO Devices ?

Migration Configuration From TWO ASA TO TWO FTD

Dear, I have FMC manage two ASA box , I need Migration All configuration from two ASA to a new two FTD model (3105 NGFW) , notes the same FMC manage anew FTD boxes and migration with the same IP MGMT . what is the best way to migration the same confi...

VLAN MTU on C9500-48Y4C (High performance) vs 4500-X

I'm migrating from a 4500-X VSS pair to a pair of C9500-48Y4C's.In the old config, here are some specifics:4500X#sh system mtuGlobal Ethernet MTU is 1500 bytes.under "show run" here's the vlan config:!vlan 3708name Prod-2mtu 9000! 4500X#sh vlan3708  ...

P2p *PVID issue in IE3300 Switch

I have an complex architecture where two switches IE3300(17.12.04) are connected to each other over the trunk and the configuration is sime as belowint G1/1switchport mode trunkswitchport nonegotiate It is showing port in Broken BKN and P2p PVID* , I...

Prime infrastructure unable to upgrade 3.10.2 to 3.10.6

Hi, Can anyone point me in the direction as to why my Prime infra server wont upgrade from 3.10.2 to the latest 3.10.6,The GUI seems to think the updates are installed however under "about prime infrastructure" it still shows 3.10.2I have confirmed t...

PS with lower capacity on 9400 switch stack

I have this 9400 stack switch with redundant power supplies, but I have noticed that one of the PS has lower capacity, like 50% of lower capacity. Please help me to figure this out. Attach the output show power: Switch:1 Power Fan StatesSupply Model ...

予備のSFPの保管方法について

お世話になっております。皆さんは予備のSFPをどのように保管していますか？箱のまま保管しており、何かSFPの保管に適したケースなどがないか探しているのですが中々見つかりません…。参考程度に教えていただけますと幸いです。

802.1x with native windows supplicant.

I'm lokking 802.1x protocol that use native windows supplicant and based on Entra ID, previously i try using EAP-TTLS but now work. Open case to microsoft then they said that EAP-TTLS is not supported by windows 11 and must use 3rd praty supplicant i...

Goal: Upgrade from Any connect client version to Cisco Secure Client 5

Dear Community Expert, We have Cisco Anyconnect client version (AnyConnect Secure Mobility Client  4.10.07062) and now we need to migrate to Cisco  SSE with Secure Client 5.1.12.146. What the possible way for deployment? Question 1 : From cisco SSE d...

3504 HA SSO sequence

My wireless knowledge is poor, so please bear with me.Our organisation has two 3504 WLCs providing wireless access to business critical endpoints. The 3504s are connected directly via their redundancy ports. The four GigE ports of each WLC are connec...

Downgrade is not supported from controller. For version 17.14

Is it normal that vmanager 20.14 can't downgrade software for routers?   [17-Aug-2024 21:06:49 NOVT] Change Partition action submitted for execution [17-Aug-2024 21:06:51 NOVT] Executing device action Change Partition [17-Aug-2024 21:06:51 NOVT] Chec...

Catalyst Center jinja template - text padding question

Hi, I am writing a jinja template to construct an IOS login banner. The banner has an outline using some character to make it look tidy. e.g. ++----------------------------------------------------------------------++ | ...

Cisco ISE authentication via certificate and authorization via Azure

Hi All,I'm configuring Cisco ISE policy sets according to this document:https://community.cisco.com/t5/security-knowledge-base/cisco-ise-with-microsoft-active-directory-entra-id-and-intune/ta-p/4763635/show-comments/trueIn that document when authenti...