Port Channel issue

CoreSW#sh etherchannel 13 summaryFlags: D - down P - bundled in port-channelI - stand-alone s - suspendedH - Hot-standby (LACP only)R - Layer3 S - Layer2U - in use f - failed to allocate aggregatorM - not in use, minimum links not metu - unsuitable f...

N9K-kernel log (KERN-3-system_MSG buffer_info[next_to_clean])

I'm facing with this LOGS.   %KERN-3-SYSTEM_MSG: [5163xxx0.xxxxxx] buffer_info[next_to_clean] - kernel %KERN-3-SYSTEM_MSG: [5163xxx0.xxxxxx]   time_stamp %KERN-3-SYSTEM_MSG: [5163xxx0.xxxxxx]   next_to_watch %KERN-3-SYSTEM_MSG: [5163xxx0.xxxxxx]   j...

Cisco 3650 stack random crashes - IOS 16.9.5

Hi, looking for any advice on solving this issue, any help would be greatly appreciated since I dont have an active TAC support account.I have a two member 3650 stack using IOS XE 16.9.5 that for the past 6 months crashes at random. It will be up for...

Cisco ISE OSアップグレード時における自動PANフェールオーバー機能の併用について

物理筐体Cisco ISE 3615 2台と仮想版Cisco ISE 1台の3台構成で運用しています。仮想版ISEをヘルスチェックノードとし、自動PANフェールオーバー機能を有効化しています。 この度、ISEのOSを 3.2 から 3.3 にバージョンアップさせるのですが、自動PANフェールオーバー機能を有効化したままで、OSアップグレードを行っても問題ないでしょうか。 アップグレードはGUI(Web)の画面から「 管理・システム > アップグレード > フルアップグレード 」を予定していますが...

Domain Name System (DNS) Guided Resource

Setup wizard not working for virtualized ISE 3.3

Hi everyone,While deploying ISE 3.3 on VMware, I encountered an unusual issue. When I entered the "setup" command, there was no response. I’ve tried resetting the VM, rebooting it, and even powering it off and back on, but the problem persists.All th...

Switching from Partner Email to Personal Email – How to Do It?

I originally set up my account using a partner email, but I’d like to switch to my personal email for better access. Does anyone know the process for making this change? I’d appreciate a step-by-step guide. I’ve been looking into this on different re...

2800 APs and 3800 Controller - Unable to connect the wifi via iPhone

Hi Guys,I have a situation where my users cannot connect their WIFI/SSID using their iPhone. However, for android users they have no issue with the wifi; I believe their iPhone has updated with the latest IOS version.The current firmware version of m...

Flexプロファイルを設定するとDHCPで取得したIPをもつAPが消える

C9105AXI-QのACL設定で、操作端末PCのIPのネットワークアドレス↔アクセスポイントのインターフェースのIPの通信許可をACLに設定して、アクセスリストの設定をFlexプロファイルに紐づけしました。これらの設定でFlexプロファイルを設定(vlanの作成、acl-listの割当て)したらアクセスポイントのIPがDHCPで取得できず、Web管理画面をみるとアクセスポイントの存在が消えていました。原因と対策を教えて下さい。

FTD 1010 ACP with manual URL not blocking

Hello, community!I'm using FTD1010 managed by FDM with latest FW 7.4.2-172. I'm getting unexpected behavior with the box, that passes traffic however it should not do so.I configured 2 rules with logging:I configured SSL Decryption to match this traf...

TEAP Problem with Windows 10, ISE 3.2 with Patch 7 and EAP Chaining...

Hi all;Consider the following scenario:The client is configured as follows:The target computer and the user both have installed required certificates installed as you can see below:Now, the client machine is booted up and the following event is recor...

Unable to Add Authorization With OAuth 2.0 in WebEx

Hi Team,I'm trying to add authorization with WebEx Connect. I'm getting internal server error. It is not showing much. I have attached screenshot of error and my configuration for OAuth 2.0 type. I tried with same configuration through postman, all w...

Talos Tickets

Hello,I am following up on my ticket as I have only received an automated response, which did not address my issue. I have also sent an email to talos-external@cisco.com and would like to confirm if I can expect a reply from someone regarding my inqu...

StackWise and StackWise Virtual Difference

Hello, I’m new to Cisco and currently studying StackWise and StackWise Virtual. Both technologies seem to reach the same goal for high availability and provide single management interface. I wonder why both exist, especially StackWise is supported in...

SSO ISE ADMIN Access with Cisco Duo

Please note that I am working on integrating ISE with Duo for Admin access. I have followed all the steps as outlined in the documentation, but I am encountering the following issues when trying to log in to ISE: The URL redirects me to ISE node 2, e...