The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
We are trying to use PLINK to export a list of active AnyConnect users via TFTP to a text file that's then parsed and displayed via HTML.We use a batch file with the following contents that calls a text file containing the required commands:plink -ss...
Working on a pair of 2130s in HA that have the URL filtering license and there is also an SSL Policy in place. YouTube isn't blocked, but there is 1 particular video that when trying to view it you get the following error: The same URL when on a co...
Hello,Need some help on the below code. we have 2 bgp path ( primary and backup) and i configure 1 subnet to be routed through main path and the rest 3 subnets through backup.on the backup i have the 3 subnet primary and the first subnet as backup ro...
I'm configuring this topologyI'm puzzled by R6 receiving R2 prefixes because they originate from a remote AS, so they should arrive with a TTL set to 1. I previously utilized EBGP multihop, but I've since removed it, yet the prefixes persist. I'm ...
Hello I just wanted to confirm if cisco switches default back to local authentication/accounts if TACACS is disabled/unreachable? So what happened is I accidentally created the wrong ACL and applied it to the VTY lines and it has blocked all ssh acc...
Hello Community,Is there any command to turn-off the paging of the commands output on Cisco iOS and display all output without paging? On Dell Switches, there's a command "terminal length 0", but the same doesn't seem available on Cisco iOS.Router#te...
Hello,Very new to the world of ASA. I just purchased a 5516 model to use as my router for my home lab. The goal is to replace my ISP-provided router with the ASA. When I try to connect the ethernet cable from the ONT to my outside interface on the AS...
Hello all,i have a problem.i have 4G router from ISP and the port is connected to HP switch then one of HP ports connected to my Cisco Switchwhen The power is off then on at 4G router .. the 4G router internet light became red and that's mean there i...
Hello Folks, I have a pair of ASA5516 with HA mode, ISP provides a high-speed WAN 500Mbps up/download, while doing some speed tests recently we noticed that all our tests from the inside network are not bypassing 100mbps, I checked all inside/outside...
I'm trying to track down why our users at our SD-Wan location are only getting 2-3Mbps file copy/iperf speeds from their Spoke to our hub. For testing, I'm VPN'ing into the spoke location and am seeing the same things. While troubleshooting, many men...
Hi We recently acquired a Cisco NCS 540 router and are currently facing some challenges with MPLS testing. Despite our efforts, we are unable to access the necessary MPLS commands on the device. This leads us to believe that the required features mig...