Does anyone how to download CBT nuggets for ACI ? I am interesting to learn ACI from beginning .. thanks vinoth Kumar C
Forum Posts
Hi Multi- Pod deployment, with 2 Data Centers, DC1 and DC2. Configured OSPF L3Out/area 0 at each Data Center over SVI: DC1 SVI subnet 10.13.254.0/29DC2 SVI subnet 10.13.254.8/29 I have applied Tenant common default contract which I understand is the ...
Version: 2.1(1h)Hi, Our apic3 was previously connected to our Leaf 101 and 102.Yesterday, this Apic3 was moved to a new building and connected to leaf 103/104.Apic3 is not anymore connected to the leaf 101/102.Apic3 has been correctly discovered and ...
I am configuring a lab ACI Multipod with only 1 IPN. I am having issue where I cannot communicate from Pod1 to Pod2. Though I am able to bring all nodes in both up and register to the fabric. Could it be having a single IPN an issue with multicas...
Could someone please clarify on the following (i) L3Out in COMMON Tenant (ii) two VRFs in Tenant UAT ( VRF A, BD A_UAT--> 10.0.0.0/24 VRF B,BD B_UAT -->10.0.1.0/24) (iii) two VRFs in Tenant PROD ( VRF C BD C_PROD-->10.0.3.0/24, VRF D BD D_PROD-->10.0...
Hi, i was trying to determine some specifics on a leaf switch running firmware version n9000-12.3(1f), within an ACI Fabric Running On N9K-C93180YC-EX Hardware when arriving at the cli / bash shell i see things are dramatically different etc, versus...
Resolved! Down Interfaces = Low Health Scores
During migration from Legacy to ACI fabric I have a ton of interfaces configured but not yet in use. This is resulting in some pretty bad health scores. I can accept this during our transitional phase, but there will always be down ports in our prod...
Hi, Is there any way to use Policy Based Redirect functionality while the consumer and provider EPGs are on different tenants. I want to pass encrypted traffic between tenants directly over ACI but the clear-text traffic over a firewall. Thanks...
Resolved! datetime class in ACI
Is there a class that can be queried against to obtain the fabric date/time? I need this information to perform various stats check against ACI via script. For example, I want to check for new faults in the last 5 minute. Using "show" command I can...
there is one ip address which can manage entire ACI fabric, but i forget, I can loging to apic controller, may i know from apic controller, how to find management ip of aci fabric
Resolved! Attempting APIC programming
Hello, I'm trying to write a simple client to connect to the APIC via browser to perform some small tasks. I'm new to the subject and I have had no great luck so far since I'm incurring in the cross-site scriptingblock. Is there a way to configure th...
Resolved! Bare metal and VMM same EPG
Current environment contains a VMM domain with a VLAN pool that dynamically allocates VLANs in the range of 1501-1515. The VMM is associated to an EPG name WKS and allocated vlan 1506 for the EPG. My bare metal/physical domain has a VLAN pool of 10...
Hello Everyone, I am new to ACI and English is not my first language, please bear with me. Currently, we have Dual Fabric ACI configured in our DC DRC setup. Each Fabric has L3 Out to ASA for Internet Connectivity. No DC-DRC connectivity as of no...
Resolved! APIC Initial setup
Hello all, can someone please answer some simple questions for me so that I can get an understanding from the beginning. So I have an APIC out of the box and I want to do the initial configuration: Qu. 1 How do I initially connect to it, HTTP via def...
Hi, Since upgrading to APIC v3.0(1k), the topology of a Pod is no longer displayed under the Fabric -> Inventory screen. Using the API inspector tool when viewing this page, no API calls appear to be made to retrieve the fabric:Link object which ...
