Hello!Resently i try to add new virtual service in ACE4710, but while modifying policy mapi have got error message:ace1/Admin# conf Enter configuration commands, one per line. End with CN...
Hi All,Customer is using WAAS 5.01. We are trying to generate WSDL file for some service name. But succeded with only three sevices. As per the document we can retrieve WSDL for the services using the url https://localhost:8443/ws/<servicename>?wsdl....
Came across the document: Routing and Bridging Guide, Cisco ACE Application Control Engine version software A5(1.0)On page A-6, section Protocols and Applications, there is a list of TCP/UDP port numbers and their corresponding literal. Also, there i...
Hi,I am trying to find out about the latest WAAS software version supported on WAE-512. This product went EOS in May 2011. I am aware that V5 release notes declare that V5 is NOT supported on WAE-512. However, there is no clear statement anywhere on ...
Hi all,We got 2 x 674's in data center and use hash method for load balancing. Due to our IP address scheme, cisco's hash method puts most of the connections go to one WAE only. I know we can increase weight (currently 0) to get nearly 50-50 or 60-40...
Two ACEs LoadBalancers are setup as active standby in routed mode.serverfarm host s1 predictor leastconns probe PROBE_HTTP rserver app1 inservice rserver app2 inserviceclass-map match-all s1_CLASS 2 match virtual-addre...
OK, I have a fairly large WAAS environment so I'm kicking myself for overthinking this. I have a particular branch that has an 881 router that terminates an IPSEC connection back to my main location. I have a vWAAS at this branch site, so I'm going...
Hi,I have 1 WAN Router and 2 WAVE devices configured in WCCP. The configuration works fine except that only the first WAVE that sees the router and established the WCCP receives the traffic. What I mean is that both WAVEs see the router and vice vers...
Hi,Has anybody experience with a CSS11503 that has a SAM module having a 99-100% utilization. Can this affect the services if both the accelerator module cpu peak to 99%. Kindly see below logs:LPHGT11# show system-resourcesSystem Resources for 1/1: I...
I have an ACE 4710 configuted in one arm mode so I am using SNAT PAT to ensure that server replies go back via the ACE.This PAT pool is running out of TCP ports as I only have 1 address currently in the pool.The load balancing is to 4 CAS servers doi...
Hi, I changed the default user name and password (User: admin Password: default) of a WAAS Mobile 3.5.0, but, I don't remember the new password. How I could recover/reset the password?Tks,Jeff
Hi,I am a complete newbie on css configuration. I only have configured load balancing on apache with a very simple setup. I have to deploy 2 applications on my clients environment that run inside jboss. One of these applications needs session to be s...
