Hi all,We have dual WAE's on the core site with 'WCCP Negotiated Return' on dual WAN and one LAN/subnet.On the edge we have WAE with inlinecard.If we setup an IPSEC tunnel between the core LAN and edge LAN will there be any design problem with this?...
Labels
-
Application Networking
(11,493) -
Community Feedback Forum
(1) -
Other Application Networking
(8) -
Other Data Center Subjects
(1) -
Other NAC
(1) -
Wide Area Application Services (WAAS)
(1,579)
Forum Posts
Hi there, I got the following request:A virtual server should be balanced to two realservers, but not simply to an IP, but to a specific port and a specific location on those servers, lets say to:“realserver1:8002/location” and “realserver2:8002/loca...
Hello all,We have a pair or ACEs peered in our network which is connected via a series of layer 2 switches. The ACEs are unfortunately running in a hybrid inline-bridge + one arm configuration. The story goes that the supplier that undertook the inst...
Hello,We have installed an ACE appilance in one of the client place. It is a simple requirement to load balance two physical servers with the VIP.Now customer is facing problem with their application as mentioned below Java applet not loading while a...
Hi AllI have come across a problem with our ACE service modules. This is performing DNS load balancing with our servers, which is working fine, with the exception of the following order of events; The client tries two queries in quick succession for ...
Resolved! how to download or get MIB of CSS
I need MIB of CSS 11503 devices which we running in datacenter , Any idea on how i get the MIB of CSS 11503
Having a ACE-Deployed for loadbalancing web-requests which are coming from a reverse-proxy. The session persistency is based on the x-forwarded-for HTTP-header entry. The situation works fine but in certain situations it looks like the ACE (172.16.3....
Resolved! ANM 4.1 virtual servers issues
I just loaded ANM 4.1 and imported my ACE modules and I am seeing some odd behavior in the Operations/Virtual servers tab. My virtual servers are showing up with multiple different VIP addresses under the IP Address:Protocol:Port.For Example VIP-WEB-...
Hi,Briefly, for various reasons, we are locating a pair of applicances on a DMZ frontended by a firewall. We intend to configure inbound traffic via a Cisco CSM located infront of that firewall.My question is what interface would send the health pro...
The following WAAS Configuration Guide has you configure the long redirect list below for "Network Modules." Does Cisco recommend we us the same redirect list for WAAS appliances as well?http://www.cisco.com/en/US/partner/docs/app_ntwk_services/waas...
Hi,We have 4710 with ACE-4710-1F-K9. 1G Bundle: Includes ACE 4710 Hardware, 1 Gbps Throughput, 5,000 SSL TPS, 500 Mbps Compression, 5 Virtual Devices, 50 Application Acceleration Connection License, Embedded Device ManagerWe have another 4710 with ...
Hi everyone.We have a customer who has a server farm formed by 3 servers with the following real ip address:10.10.24.5-6-7 and a virtual 10.10.24.3 as configured in the ace module.We found the following behavior in the session number of the servers....
Good Evening All,I am having my first attempt of using the prepositioning function within Cisco WAAS running version 4.1.7a and its not going very well at all.........:-(We are trying to test a preposition of Microsoft Updates to a selection of Branc...
Resolved! Sticky Table on ACE 4710
I try to show all the sticy sessions for a http-cookie I have defined, but none of the sessions show up in the list:sh sticky database http-cookie ATSTSESSI can do a show conn and I see a bunch of connections, and I know the app is working, but I don...
Is there a way to add a helper-address (or something similiar) to the CSM server VLAN? My unix team is planning on setting up a PIXE server boot server and a few of their servers that would need the ability to boot from it are in the server VLAN that...
