I have found event id`s like:switch unreachable (using this with success for switches)router unreachableWLC unreachableHave tried "AP disconnected from WLC" but it doesn`t seem to work when I disconnect my test APKindly regards
I have found event id`s like:switch unreachable (using this with success for switches)router unreachableWLC unreachableHave tried "AP disconnected from WLC" but it doesn`t seem to work when I disconnect my test APKindly regards
anyone know if it is possible to push multiple snmp servers and multiple snmp v3 users to 1 switch using DNAC.
Hello,I'm wondering does the DNA center support basic auth for SMTP? I found in the docs that it doesn't support TLS but no mention of basic auth. Then I found here that it has dedicated text box fields for user/pass: https://community.cisco.com/kxiw...
Hello all,I am confused with DNAC Hierarchy Design.My environment is made up of over 80 buildings with single floor in each buildings. We presently run a campus architecture.It looks like I can only move a device (In DNAC) into buildings during the d...
Hi team,We are unable to see Audit logs after DNAC upgrade from version 2.2.3.5 to 2.2.3.6. Every time we try to access audit it throws "The request to the backend service is timing out. Please refer to the backend service's logs for more details". T...
Hello, I am in the middle of a migration from Cisco Prime LMS version 4.2.5 to Cisco DNA 2.2.2.3, and I have a lot of devices already onboarded to Cisco Prime LMS that I need to transfer to the Cisco DNA. Is there a guide or fast way of doing this ...
How does the licenses work on DNA. Is it per device? Meaning I buy a DNA appliance then I buy a software license for that device. Or does it work on how many devices I have within my network? If I have 250 devices do I need to buy 250 licenses? That'...
Hi all,I tried to re-image our dna appliance (2nd Generation) with version 2.2.3.5 but run into password issues and I need help.I am able to complete initial wizard as listed in the installation guide release 2.2.3. After the installation, I am unabl...
- FYI : https://www.cisco.com/c/en/us/support/docs/field-notices/724/fn72428.html M.
Do you have current hands-on experience using Cisco DNA Center to help monitor and troubleshoot your organization's wireless network? If so, we'd like to speak with you to get your feedback on some new concepts of a network management tool! We ask th...
Hi All, Provisioned quite a few switches via DNA-C, anyone know how to increase the line time out please in DNA-C for switch templates? Keep on getting " line time expired " and need to increase via DNA-C templates. Cheers, Cisco DNA-C (Switch ...
Hi all,I am currently rolling out DNA center and have run into an issue. At one location I have a floor plan from the install team showing the location of all 100 access points. However, the APs are not labeled. I have imported the Cisco 5520 WLC and...
We have a SD Access lab consisting of two C9300 control-plane/border nodes connecting to a pair of C3750X switches doing the fusion role. Connected to the C3750X's are the ISE, DNS, DHCP, AD and NTP nodes, plus a C9800 WLC. There are another two C9...
Hi, I am trying to use LAN automation from DNAC 2.2.3.5 and discover the devices connected to my seed and peer seed devices. The IS-IS config and other necessary part is done for seed and peer-seed but for the downlink connection to the PnP agent d...
Hello everyone, I tried to migrated the virtual account for 19 devices, using DNAC (version 2.2.3.5), but the task is "in progress" for more than 2 hours. I believe it is stucked. Is anything that I could do stop/reset the that task?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-10-2024 10:25 AM | ||
10-10-2024 05:44 AM | ||
10-09-2024 07:02 AM | ||
10-08-2024 07:20 AM | ||
10-07-2024 10:36 AM |
User | Count |
---|---|
3 | |
2 | |
1 | |
1 | |
1 |