I have tried to load Cisco Modeling Lab 2.7 and 2.4 on two different PC laptops (Samsung and Asus). Both machines met the system requirements to run CML. I used VMware Workstation Pro as the host and on both machines I was running Windows 11 Pro. Whe...
Forum Posts
Good morning,I bought CML Personal about 2 weeks ago and have still be having issues with the installation. The error message i keep recieving in VMware Workstation Pro. Im ready to get my studies going and this has been such a hurdle!Ive tried sever...
Hello,I installed the "free version" of Cisco CML.When I wanted to start a node within a lab, the following message is displayed:Cisco-switch1: No compute host can start nodes, rejecting all node starts (cml-controller does not have base images.I was...
i know there's been a lot of post around CML download, but i really do need help as none of the recommended steps has helped thus far (update address, clear browser cache, cisco support, etc). I bought the CML personal plus over the weekend but keep ...
Resolved! CML Memory Utilisation Limit
Hi, we have deployed CML 2.8 on baremetal and are hoping there is a way to adjust the system memory utilisation limit of 80%? Our server has 256GB of RAM and an 80% limit on large servers is quite a waste. We were hoping to be able to run at least a ...
I just recently bought Cisco Modeling Labs, but every time I try to download I get the same error:"Thank you for registering with Cisco.com. In order to consume software or services we require your full address. Please follow this link to return to p...
I launched a tacplus container and it's working great. The tac_plus.conf file contains the line accounting file = /var/log/tacplus-acct.log But since this is a container, we don't have access to the file system. Or is there a way to access the logs?
Goodday How do I buy CML for another person not affiliated with my company? Do I login with my Cisco id and during purchase enter their email/cisco id? Other recommendations are to buy a gift card but I do not see the difference. Regards Anwar
Hi All, Does CML support Resilient Ethernet Protocol (REP)?
Resolved! CML 2.8 : bridge configuration issue
Hello, I bought CML 2.8 Personal 40 nodes. I'm running it on an ESXi 8.0 server. I'm trying to configure several bridges. I followed the documentation in CML 2.8 Admin guide : "external connectors": 1) I create 2 bridges in the cockpit : bridge123 an...
Installed CML free version, and then downloaded the Refplat file (refplat-20241016-freetier.iso), and mounted CD and then from the CML 2 System Maintenance Controls pressed the Copy Refplat ISO button. Saw messages that showed files being copied, af...
Hello CML community! I'm using CML to build all kinds of demos. I’ve successfully onboarded virtual Catalyst 9k switches via PNP into Catalyst Center and was able to build 802.1X and TrustSec labs, nice! However, there's one thing that’s been frus...
Hey all, I have read several forum posts but cannot get bridge mode on external connections to work. I have done the following: Enabled promiscuous mode and all those other security settings in the VMware port group Added external connection in brid...
Resolved! DevNet Sandbox CML
Hey all! I am trying to host the TIG stack on my personal laptop so I can collect and store Netconf data from a network I will be building in the reserved CML instance. However, I am having some problems being able to connect to my personal laptop. ...
I am trying to find a good example or lesson on configurating TLOC extensions utilizing the Configuration Groups (Not classic templates) and the C8000v. You can use the guided tour when using Configuration Groups and enable TLOC extensions there, b...
