Hello,I am running CML 2.7.2 and using the following topology with IOSvL2 switches: I have configured SWITCH 1 as VTP Server, and SWITCH 2 and 3 as VTP clients. The VLANS are:- VLAN 10, active ports on SWITCH 2 only- VLAN 20, no active ports on any s...
Hello,I am running CML 2.7.2 and using IOSvL2 switches with the following topology:Is a very simple lab, and my goal is to see the Collision and Late Collision counters increase when I send data on both ways at the same time. The 2 switches are alrea...
Hey guys, so I was trying to follow along with a lab video posted on CBT Nuggets where they are using CML and a pair of NX-OS 9000v switches and a CSR1000v router... Got to the point where interface MTU size needed to be changed to 9216 but the CSR p...
I have been working with Cisco Support on this issue for more than a month and they can’t find out what the issue is or how to correct it. I am wondering if anyone has seen this issue and have any suggestions on a fix.I have installed Cisco CML Ente...
I reserved the cisco modeling lab but it failed to properly execute the setup script and I never received the second email with the anyconnect info. This has happened to me several times in the past and the only solution I could find was to end the l...
Everytime I try to download Cisco secure client 5 to reach the Cisco Modelling Labs, I receive the announcement that there is no valid subscription and after that I can't download anything from the Cisco software site.I would like to present the Cisc...
Hi,Can someone teach me how can I save the session in MobaXterm? I will explain below.So to connect to a router that you added to a lab in CML you have to type "open /Lab at Mon 13:46 PM/R1/0" for example. After you ssh to CML's IP. I want to save th...
HSRP virtual IP unreachable with portchannel subinterface in CML lab########### config for switch begins here #######!conf t!int po32description "port-channel interface connected to rtr1"switchport mode trunkswitchport trunk allow vlan 10,20no shut!i...
I would like to setup a Windows 10 image in CML. I want a Windows workstation in my network. Is that possible?
Hello team, Facing problem with launching cisco modelling labs. Is there any known issue that is ongoing ? It was very smooth fed days back though.
Hi, I created an attached lab in GNS3 and recently added a VMware VM Microsoft Server 2019 into the topology. I am having an issue where I can ping all the network devices and all the VLAN's in the topology from the server to all devices, however, I...
Greetings, Trying to create a lab environment where I'm using (7) NXOS9K's in SPine/Leaf mode configuration. I ahve the proper memory, CPU & Disk space but when I try to start (1) node at a time it comes up in loader mode: dsDxe: loading Boot0001 ...
Hi Community I have added/imported an ASA5500 Node on version 9.1.5 into CML however the node does not want to successfully start up. I have tried different setting under the node properties but to no avail. It seems to be in a boot loop. I need to r...
I recently purchased a CML license 40 ndoes and installed it on CML Labs within Proxmox. While the sysadmin credentails are functioning correctly for both SSH and the GUI, the admin credentails are not working. I have reinstalled the system multiple ...
Hello,I'm trying to provide some guidance different vxlan overlay options, showing the tradeoffs of simplicity and scalability. I'm tryin to use CML to show that an org COULD use static vxlan tunnels to send traffic around, but the nx9k images don't ...
