Cisco Software Discussions

My lab is behind an old ASA5510 box (yes, I know, legacy hardware, but it does give us the Vnet isolation and some firewall protection).For testing purposes, I need to have one of the devices attached be assigned a stable address by DHCP. Unfortunate...

Hello,I am using Cisco prime 3.9.I have a list of ip with Cisco switches.I want to enter commands to devices in this list.How can I enter commands to the devices here in bulk?Thanks for your help.  

Hi,I have a visually impaired student who wants to try a CCNA certification. Is there a way, that he can do the Packet Tracer Labs on his (Windows/Linux) laptop. Found only one document containing "visually impaired" dating back to 2019 (Instead of P...

Hi,I formated my ubsflash as ext3 so I can upgrade cat93L from the ubsflash. But i faced some error when I unpluged the usbflash from the switch as it shown in Part1. Then I wanted to check if there is something wrong happen to the usbflash or the sw...

Hi All,I have to upgrade 3850 switches to the latest ios version with an external Hard drive that is formatted to FAT16 and partitioned to 1GB but the switch didn't recognize it. switch#dir usbflash0:%error opening usbflash0:/ (No such file or direct...

Thanks, guys1. This question is regarding Broadsoft.Do you know what the Call me now and being forward is configuring for?Are these two categories under the outgoing calling plan?2. What is the differences between simultaneous ring and Broadworks any...

Hi Team,I have installed VMware workstation player 16. Installed CML 2.2.3 and 2.4 also. CPU 8 and RAM 16GB allocated. Unable to connect IP via web after configuring CML.I tried with browser HTTPS connection on and insecure content add/remove setting...

Hello , We have isr 4331 (ios version: 3.16.04b.s ) and we  have to upgrade it to 17.06.03aplease what is the upgrade path from 3.16 to 17.06 ? thank you in advance 

Hi all, I am new to this community and unsure whether this is the right place to ask this question here. Apologies in advance.I am doing the "Getting Started with Cisco Packet Tracer" Course to learn the packet tracer from skillsforall.com. Within th...

So Im a student using Cisco Packet Tracer, Im trying to make a network, but while configuring my edge routers I keep running into an issue of it "overlapping" with another port, Im not sure whats going on as Im just following what they said, so, Im n...

Hello,I have a weird problem with my switch.I have an ospf and I wanted to add 2 networks:network 172.27.3.0 0.0.0.255 area 0.0.0.0network 172.27.7.0 0.0.1.255 area 0.0.0.0But in my run config is no write network 172.27.7.0 0.0.1.255 area 0.0.0.0 but...

I bought a switch 2960x-24ts-l. The seller says that he cannot update it to ios version 2022 because the 2017 switch may not come up with ios 2022 due to the old hardware.is this true? 

Hi,We have a new installation of DNAC - Version 2.2.3.5The issue I have is with some, not all IOS updates to 2960X/XRs which fail the pre-check with the following messages:Unable to download file using HTTPs and SCP.The certificates are installed and...