FindIT Network Management Discussions
Join the FindIT Network Management discussion community and gain valuable insights from industry exp...
67 PostsActivity in Small Business Support Community
Issue with new CB250
I have an older aruba switch with a sfp port and a multimode fiber connected to it.then I use a networkcable to the CB250.on the other end of the fiber is a CB350.when I connect the fiber cable from aruba to CB250 I get link up, but no internet.on th...
SG500X-48p TAA Compliance
Greetings, I'm creating a system that requires a TAA(Trade Agreement Act)-compliant switch be used. I have a SG500X-48p, SN: DNI181602C0. How can I verify whether the device is TAA compliant? Thanks in advance for any responses.
"cisco-probe" user
The management function of 240ac Wifi accesspoints does periodic radius requests with a user named "cisco-probe". Part of "Active Fallback" radius mode.Currently these requests fail, and fill up my logs.Which password does this "cisco-probe" user hav...
Problem occur in cisco exam.
a pop-up appeared on my screen, and unfortunately, my exam session closed unexpectedly in the middle of the exam.
Issue with intervaln routing with our CBS 350 switches.
This is related to a previous issue I posted here "titled issue-getting reply traffic back from our cbs 350 switches".I have three VLANs defined on our CBS350 switches and sub-interfaces configured on our router (PaloAlto firewall) with all policies ...
Need Help resetting Cisco 2960L-24PS-LL to factory defaults
I have tried multiple instructions on resetting this switch (Cisco 2960L-24PS-LL), but nothing I do works.I have held the MODE button while powering on the switch for various intervals (from 15 seconds all the way up to 2 minutes)I can access the con...
SG500-28P all ports down after factory reset
Hi I have an SG500-28P that is behaving oddly. Factory Reset via button on the front took ages to respond, I have been told 10 seconds or above and it should flash all lights and reboot. It does not. Finally got it to reboot and now it goes through t...
Cisco Webex Room Bar BYOD
Hi there,We have recently installed a Cisco Webex Room Bar Model: CON-ECDN-CSBARMPN. We seem to be having an issue getting audio out from the sound bar. We can see the camera & the microphone but no speaker. The navigator is been used for BYOD only a...
Resolved! Need flush rack mount bracket for Business 250 Smart Switch
I just purchased a Cisco CBS250-24P-4G 24 Port Smart Switch with the intention to mount it in a rack. The unit came with a mounting kit but the brackets force the switch to stick out more than an inch.Are there brackets that enable a flush mount so t...
Recomendacion SG350-28mp
Me comentan que este modelo ya esta fuera del mercado, es así? y de ser así cual seria su sustituto ? Y es posible que sea sin NA?
Meaning of "non-XG" devices in CBS250 manual
Hello, what are "non-XG" devices that are referenced in the manual like in the screenshot i posted? I have a CBS250-24P-4X switch, does the "X" mean it's an "XG" device?
Resolved! Need MAC addresses of specific port, not all possible ports
I'm looking for a way to get MAC addresses on a specific port that doesn't include all possible ports.For example, I want all mac addresses listed on port Gi1/0/2. I don't want MAC addresses listed for ports 20-29, just 2. "sh mac add | i Gi1/0/2" d...
Can't log into 350-28 managed switch after firmware upgrade
I upgraded the firmware on my Cisco 350-28 Managed switch to the latest (2.5.9.54). After it rebooted, I was no longer able to log into it with the credentials which formerly worked. It is working fine, and everyone on my LAN has internet access, b...
Discount for Netacad students on CCNA Exam
Hi, does Cisco still provide discount vouchers to students taking Netacad CCNA courses and passing them with more than 75%?
VTP protocol on CBS switches
Hi, I have a CBS-350 series switch and want to check whether it supports the VTP protocol. Do you know how I can do that? Thanks,
| User | Helpful Count |
|---|---|
| 3 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
