IP Telephony and Phones

We have Call Manager 6.1.1I would like to set up the following.Person calls ext: 8002, 8002 does not ring but the call goes to ext: 8001. If 8001 is busy or is not there, the call goes to ext: 8003. If 8003 is busy or is not there, the call goes to e...

We have configured a CME with the following configuration:ephone-dn 1 octo-line number 70 call-forward busy 51 call-forward night-service 99Number 99 is a answering machine on a FXS port. This won't work. If i call the DID number of the answering m...

Hi can anyone tell me if 3621 router can support VOIP? if so which IOS can I use? Thanks in advance!!!!

Hello, I need to shutdown the call manager remotely from another server (to send the command). I want to configure my ups when there is an electricity problem to send the shutdown command to the call manager.I was thinking to create a batch file on m...

Hi All,Is it possible to copy upgrade software from the cli which was originally copied to the uccm for an upgrade.CheersDave

Hi,I have a Hunt Pilot on call Manager configured to CFNA/CFHunt Busy to Unity VM. The Hunt Pilot numbered has been configured on Unity Connection with 2 Alternate Extensions. I would like the MWI to come ON on both Alternate Extensions when the Hunt...

Hello. I'm trying to connect my 7971 with a SIP image to the third party Broadvoice service. My SIP load is SIP70.8-3-3SR2S. I talked to tech support at Broadvoice and they said that the only way I can get a 7971 to work with them is if I hardcode th...

We have installed IPMA with proxy line on CUCM 6.1.1. When the assistant console is "online", and the "DivAll" on the managers phone is enabled (on),all calls to the manager line are routed to the assistant's phone as expected, but when "DivAll" is d...

I am running CUCM 4.2 on cisco appliance, recently we are experiencing problem with the system because of the memory leak bugs on the version 4. My vendor suggests me to upgrade to 5/6 or i have to reboot my cucm every 30 to 60 days. Do I need to buy...

Hi!I have a strange problem with my ephones with enabled VT Advantage. Ephone always setup RTP stream using UDP port 1684. I setup VT Advanate, and after that I found that ephone use random UDP port for RTP. How can I set one ore some port range for...

Hi,There is a query about exytension mobility wherein a user logs in into IP phone through Extension mobility across WAN.After user logins and WAN link goes down, whether EM will still continue to work.Is it possible to configure EM on SRST ?regds,am...

We have a trunk between 2 clusters.Each cluster has 5 servers spread geographically. 1 is ver 6.1 and the other is ver 7.In the trunk config we have added sub a b and c for each site.All works perfectly, except any phones that are subscribed to sub 4...