MPLS

hi allI want to enable traffic engineering per VPN but stuck up as i dont know where to find any solution. I m able to do TE for aggregate traffic but not per VPN. Any help is appreciatedregardsAasheesh Gupta

Does anyone know what's wrong here ?COREIBVST002#ping vrf PRS-netwerkProtocol [ip]: Target IP address: 10.2.32.2 Repeat count [5]: Datagram size [100]: 1526Timeout in seconds [2]: Extended commands [n]: Sweep range of sizes [n]: Type escape...

Hi all!I get the following loggings on a router, searched the net but didn't find anything! Does someone know what it mean?- X received in update for prefix 65005:811:10.40.0.0/16 from 172.16.105.1 - *May 9 16:07:41: %BGP-3-INVALID_MP: Invalid MPLS l...

Folks, Configured SSM Multicast routing on MPLS backbone routers and want to test out multicast VPN. I trying to ping multicast source from one PE to the other and do not get a response, i see the multicast tunnel up though for that vrf? do i n...

Hi,I heard from a colleagued of mine that NPE-G1 processor load increased substantially when many vrf ware PAT entries were being created simultaneously. THis was only apparent when ping packets to the Internet were being translated as there is a sep...

Dear All,I have several MPLS VPN sites running OSPF between the CE and PE routers. All the CE routers are in area 0 and configured with the same process ID.On some of the sites, I am having to re-distribute non-OSPF routes.These non-OSPF routes appea...

I have a scenario where multiple customers ethernet links are getting terminated on one switch and one of the trunked GBit port of switch is connected to a router Gigabit Ethernet port. Gig port is configured for dot1q encapsulation with suinterfaces...

Hi,I am facing a serious problem with OSPF on MPLS. Our network is composed of IGX-URM as P router and 7206VXR as PE. The PE is connected to the P via E1 with VSI partitions. Initially, I was able to extablish the neighborship but after a while the 7...

Hi,can MPLS load-balance ? (when using OSPF as IGP there is a possibility that 2 prefixes will be reached with equal cost...). And what if a router has several links to the same router ?Thank you

Hi, recently we've been start pushing our MPLS IP-VPN and VPLS solution to some customers, while most of them reluctant to have a revamp to their network infrastructure (most of them running on frame-relay). I tend to think that me myself can't find ...

What is the minimum software version for Cisco 2620XM to execute mpls?I am running Version 12.2(24)but enable to run mpls command.1)Router(config)#tag-switching advertise-tags2)Router(config)# interface e0/1Router(config-if)# tag-switching ipPls help...

Hello All, We have deployed VPN's via ethernet and we integrate that via dot1q VLAN's on a subinterface on a GigEthernet. We then make those a member of a specific vrf forwarding VPN for example. interface GigabitEthernet0/1.101 description VPN-CUST1...

hiSomebody knows How can I connect some vlans from switch2 to switch1.. Actually I work with lan switching but I need work with MPLS. Thanks for help me to solve my trouble