Hi, is it possible to redistribute ospf routes from one vrf to the global ospf process ?... i have the command "redistribute ospf vrf " under the global ospf process but it is not working for me. I am using vrf lite configuration. Thanks,asanes
HiThis question is with regards to naming conventions. As a service provider I am launching a global FRoMPLS service in 6 different locations, where each location will have 2 ports on the same PE: one for data traffic for all customers located at tha...
We have FR over L2 MPLS setup from A to B . E1 in A and 2 nos of T1 in B side. We have output drops in Serial interface in A side .Basic FR configurations is used and Qos Is not used,A and B are connected using Inter AS L 2 MPLS,Local link at A is fi...
Hello,I would assume that if the bgp table has a route with a rib-failure, it would not advertise to its peer. Why does it do so?Little lost with this?I learn my directly connected network from an MPLS PEand corrctly get a rib-failure for it.router1...
Dear all,I was told by one of my friend that IP has now got all the features available in MPLS. So in your existing IP network itself you will be able to provide all the features available in MPLS. How far is it true ? Regards,R.Rajaraman.
The network will be supporting VPN, VoIP, FRR, TE, QoS, etc. Between ISI and OSPF, which one is easier to configure, support, and troubleshoot, etc.? Which is more scalable?
I would like to better utilize the available bandwith of a network by creating some PE to PE tunnels.Some of the customers VRFs will use the SPF path and some other VRFs customers should go through the explicit longest path/tunnel.What would be the ...
Hello, I am an MPLS newbie ad I have a designquestion maybe someone could help with.If a client outsources its WAN to an MPLS provider andall of the clients global routing goes into one VRF. The client has an external connections to a thirdparty in ...
Dear Sir!in Further to my previous thread (MPLS TE tunnels with DS-TE), I'll want to implement this solution:One of the ways to solve this problem is to use different BGP next-hops for the prefixes (probably VoIP prefixes) that attract the LLQ-bound ...
Hi guys, having a 7513 runing MPLS VPN, wiht QoS, the router started since 1 week ago with this log:14w1d: %SYS-2-QCOUNT: Bad deqeueue 63C85E28 count 1-Process= "<interrupt level>", ipl= 1-Traceback= 6025FEC0 60260660 60261274 60261380There is no aff...
Ok folks, here is the picture. I need help to actually make a loop happen. I am trying to see where and why I would need to configure SOO. If anyone can update me on what I actually need to do to see this loop it would be appreciated. I am tryin...
Hi all, I have policy map, which changing DSCP field value for all incoming packets policy-map MAP-in class class-default set dscp af33 It work fine, except when IPSec packet going thru, policy map doesn't affect DSCP on it, so DSCP remain the same. ...
Hi there,I'm searching some solution regarding configuration on Inter-AS MPLS/VPN that is currently using private AS. Consider, ISP A is using unique/public AS and ISP B is using private AS. Can CE in ISP A communicate with CE in ISP B eventhough ISP...
Ehlo , I have found strange problem with MPLS-VPN and TE.If TE tunnel destination is not equeal to VPN-IPv4 next_hop attribute i found that despite autoroute announce or static routes IOS won't install properly RSVP label in VRF FIB for forwarding ( ...
