Network Access Control

I will be setting up two remote offices to connect to our main office. I will be configuring each branch office router to run a site-to-site VPN to the main office. I want to have individual users authenticate themselves with our ACS server at the m...

Can an antivirus application (i.e. Symantec) be installed on an ACS appliance (1111) without voiding warranties or making the product unsupportable?

We are using the ACS v3.3 to do TACACS authentication for network device administration. This is authentication is via windows Authentication. The issue I have is that ACS will not authenticate users from one domain (e.g. domain1), BUT it will authen...

Hi,I need to enable TACACS authentication for few Cisco 2620 Routers ((C2600-IS56I-M), Version 12.1(5)T) with Aysnc ports (Slot 1:Async Port adapter,32ports). Line interfaces were configured to accept reverse telnet call. Line 34 is connected to an A...

I am trying to setup clean access server to use our Cisco ACS. Is there a link where I can make sure I have this all setup properly? I have set the ACS server network devices and the Clean Access Server (through Clean Access Manager). Do I set up the...

I am currently working on a configuration for my remote teleworkers that alows both a DMVPN connection (supporting both voice and data) while also only allowing authenticated users via 802.1x to see the tunnel.I have been going round and round with C...

I am testing 802.1x port based authentication and the problem that i am having is, it does authenticate to my internal network rather I get authenticated to my Guest Vlan which points to the internet. this is my first time to participate on this for...

Hello all,could you give me advice ifit is possible upgrade ACS from ver. 3.0 or 3.1to 3.2 and preserve current configuration on ACS.So I mean only upgrade I do and everything willwork like before.rgjl

Hello, How we can associate a fixed address for VPN client.We use a radius server for authentification and PIX 515ETHANKS

Greetings All,Am wanting to modify user profiles -- specifically, I am looking to apply or modify password expiry dates.I understand the general profile structure and syntax, however, I am not able to modify the profile line to include the expiration...

Hello.My TACACS server is a ACS 3.3.2. I have associated two Active Directory groups to two of the ACS groups.1. I need to give full telnet/ssh and console rights to Group1 to our IOS and CATOS devices.2. I need to allow Group2 to sh only the SHOW co...

I am setting up a LAN to LAN VPN between two remote sites and our main office. There will be multiple computers connected in each branch office.There will be a firewall connected to the head end VPN router in the main office. The tunnels should be ...

We are configuring ACS for use with external user datbases (e.g., Active Directory) in an environment with multiple domains and no trust between them (multiple business units).- Can ACS access mutliple domains (of the same or different type), with th...

The web page provided by the router using Auth-proxy is too simple? Can I redirect users to a customized Web page using auth-proxy?

I am trying to figure out why it takes about 20 seconds for my login prompt to come up when telneting to my cisco switch using tacacs.