Hi, need some help. Would anyone have any idea what could cause frequent disconnection of VPN for RV345? Was not able to see what is the cause from the logs. Have to reboot it. Suspect could be due to cpu/memory resources not being released properly ...
Forum Posts
On production environmentWhy it is important do determine the designated port?Thanks
Hi is there are document covering the rules for pattern matching syslog messages. I have a script to shut a port if an IPSLA times out. I put this together to automatically recover the interface when the following syslog entry is made %RTT-4-OPER_T...
Hi guys, I'm trying to configure live vty on my Cisco SG-300 series switch via cli but the switch is not recgnising the line vty command. Any help
show install impact commandHi, I am trying to prepare for an upgrade to our Nexus 7K's. We are on code -7.3.7.D1.1.bin When i run the following command I get an error message which I can't seem to find any info on - show install all impact kickstart...
Hello,I have set up my new home WIFI a few months ago and I have some issues I am unable to get hold of... maybe somebody can help, I think there is something missing which I just don't get... My hardware components:I have a modem provided by my ISP....
Hi,While configuring enhanced object tracking with IP SLA icmp-echo leveraging track lists, I understand that each object is completely independent from each other in terms of timings (frequency), states, etc.Since each tracking is bound to an ip sla...
Hi, Does anyone have the startup config that is running when first purchased? I reset the switch using the mode button and it lost the DHCP server and webui etc... The switch is running and can console in but there is nothing setup. Thanks
hello, we have some problems with the software images activation in Prime infrastructure 3.4. We want to update a C9300-24T with IOS 16.6.2 to 16.6.3, the deployment job works fine and the file is copyed to the switch. but when we want to install ...
Resolved! problem
hello everyone , I hope you are all well I connected kalilinux to eve_Ng but no commands work what is solution for that ?thanks for answering
How can i get service contract number for download the software?
Hi Team I have WS-C3850-24T (None POe) switch with Default AC power supply PWR-C1-350WAC i want to install secondary supply in it as its an critical switch. I have a spare of PWR-C1-715WAC-P V01 can i use this power supply as secondary into the same...
New on this job. Nothing was labeled, drawings are all off, and I'm going through and doing a physical audit of the whole network now. I have on the old controller (5500) an AP labeled in the basement, but guess what. No network at all down there, bl...
Hi, we wanted to upgrade a switch/stack over Prime, but failed as it reported that there is not enough space on the member; not aware where this usage might be coming from , 10 other 9200 stacks were upgraded the same way without issues; show flash-1...
