Network Management

I'm trying to run CiscoWorks LMS 2.5. I installed CD One, RME. When I go (after login as admin) to server/admin/licencing I have following error: "Error communicating with License Server. License Server may be down. Please start the License Server, ...

hi :)Can anyone give me a hand pls? here is the situation:- LMS 2.5.1 on Win 2003 Server R2- License file sent from CISCO was put in the LMSLicense directory and successfully located during RME Installation. when I try to open licensing;common servic...

On Campus Manager, topology view, the routers are displayed disconnected from the switches, why don't i see the link between the switches and router?Thank You for your time and assistance,Genet .

New LAN equipment has been installed :Ports were not configured with an explicit "switchport" statement. As a consequence, our Operations Team is unable to use LMS to do first-level management of ports (i.e. VLAN assignment, text description and othe...

Hello,Basic Question:How can I do a "nslookup <hostname>" in an eem tcl ?Background:I need to modify the running-config by putting the same (!) ip address at several places (crypto map peers, access-lists, routes).No Problem. Basically that already w...

I've discovered devices using Campus Manager. However, when running the Device List Report under Common Services> Device and Credentials nothing's there. How do I get discovered devices from CM to the rest of the Ciscoworks Apps (RME, DFM)?

If the log-adjacency-changes command is NOT present in a router's config, will OSPF adjacency changes still be written to the device's log file?

I have tried discovering devices in the LMS 3 but when i am doing snmpwalk it gives error as :C:\>snmpwalk 10.48.69.9 -c R3r0ut3Cannot find module (IP-MIB): At line 0 in (none)Cannot find module (IF-MIB): At line 0 in (none)Cannot find module (TCP-MI...

Hi,is it possible to get notified about the clearing of an _alert_ (not an event). The checkbox is there in the configuration area of a notification group after all, but it doesn't seem to do anything.Greetings

HelloIs it possible to configure the 3750 switch to send a snmp trap whenever there is a crc error on its ports?Thank you

Hi there,we want DFM to use as Trap-Forwarder to an other NMS-Application.For that I configured following in trapd.conf-fileCSCOpx\objects\smarts\conf\trapd.confFORWARD: *.*.*.* .* * * trapreceiver:162Unfortunately CW2000-DFM does not forward any tra...

ON the website Cisco states that the ASA 5505's are supported in RME (for some jobs like config mgmt etc.) with the ASA device update package and the mdf files.I have done all these and yet I am not able to get my ASA's config's saved. When I check ...