Network Management

1. 172.31.51.11 172.31.51.11 Oct 17 2006 21:01:37 RTD 1 ADDR_FLAP GigabitEthernet0/1 relearning 5 addrs per min 2. 172.31.51.11 172.31.51.11 Oct 17 2006 20:59:07 RTD 1 ADDR_FLAP GigabitEthernet0/2 relearning 5 addrs per min I have tons of syslog msg...

How do I disabe SDM? Is it enough I disable HTTP in the router?

Under Ciscoworks LMS 2.1 the RME Syslog severity level summary report grouped it's findings by DEVICE NAME with a hostname.Since upgrading to Ciscoworks LMS 2.5 the RME Syslog Severity Level Summary Report groups it's findings by INTERFACE with just ...

I am running QPM 3.2.3 and want to have router originated packets to be marked at "internet" precendence. For this we used the ACL + Routemap command before using QPM. Now that I want to use QPM I need to reverse engineer the QPM config and the CLI C...

When 'Check Device Attributes' is run on any SSH enabled device, the 'Check Device Attributes' window incorrectly displays the TACACS and TACACS enable attributes as 'failed.'Some points:1) Server Config>About Server>Applications and Versions  --- ou...

Hi frenz, I am using NAM2 3.4..... I m facing one problem. When i check my voice monitoring than it shows all of three protocols but it shows details of only H.323 protocol. While it is not showing details of MGCP and SCCP protocols. Plz ...

I would like Campus Manager (4.0.5) to poll a Nortel ASF to get IP address information for User tracking. Is this possible? The ASF is used as our central router and being able to relate MAC to IP would make User tracking much more useful.

We have deployed BBSM53 for guest auth on a wireless network. Regular 8080 traffic is flowing fine, but ssl/ipsec/443 traffic is being blocked. Authorizations are being done via access codes, so SSL was not a concern. Do you still have to have a S...

hi all i have a silly doubt. if i buy a 3560 with the SMI image loaded in it. and then i install a EMI image in it then will it support the EMI images. i mean my main doubt is is it just abt the images or do we need a license on the switch for runnin...

DFM (2.0.6) doesn't send smtp alerts.And ..\CSCOpx\log\dfmLogs\NOS\nos.log is empty.What all I may check? (mailhost is correct; Event Sets & Notification Groups etc also seems to be correct...)

Hi After upgrade to lms 2.6 i have got problem to access the server. CiscoWorks Tomcat Servlet Enginee server is not started and i get this error code 1067. Can someone help me.

Multi-part question. I would like to take advantage of ERM to monitor our routers for global usaage of CPU, Memory, and Buffers. Once I set the thresholds, how can I;1) Generate loads to test 2) Is there a reference for the SNMP traps that will be se...

Hello,Please could anyone help me to enable the command "show processes cpu history" in GSR 12000?ThanksCassio Gomes