cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
500
Views
0
Helpful
0
Replies
Sergio Torres
Beginner

NAM not seing traffic in one direction

Hi, I got a 6500 VSS with a NAM plugged directly. We are not allowed to manage the SPAM sessions from the NAM appliance 2204 Version 5  , so we configured directly in the 65K CLI. We are trying to do captures but we get traffic only in one direction (ingress).

SWTRMCORE#sh ver

Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXH6, RELEASE SOFTWARE (fc1)

The NAM is plugged into port:

interface GigabitEthernet2/1/3

description Conexion Monitoreo NAM2204 Port1

switchport

logging event link-status

Span session is set as follows:

monitor session 1 source interface Po10 , Po11 , Po21 , Po31 , Po32 , Po39 , Po42 , Po43 , Po44 , Po45

monitor session 1 destination interface Gi2/1/3

When we did some testings, we made sure that traffic was in deed through the portchannels in the span session by doing tracerts and generating icmp traffic. Still unable to see traffic in one direction.

0 REPLIES 0
Content for Community-Ad